Need a picture of your 301 .410 choke, out of the barrel, next to a measuring tape. Thanks in advance
Trying to figure out the threads on a choke I have
Favor
-
- Posts: 47
- Joined: May 15th, 2021, 8:22 pm
Re: Favor
Thanks Southpaw. That’s perfect and exactly what I needed
-
- Posts: 30
- Joined: July 31st, 2021, 6:36 pm
- Location: Pembroke, KY
- Contact:
Re: Favor
The 301 should use what Carlson refers to as "Short Invector", the tube is 1.5" inside the barrel. As far as I know that 1.5” long choke is specific to the 301
https://www.choketube.com/interchange- ... -shotguns/
https://www.choketube.com/product-categ ... 1-5-flush/
The standard flush fit "Invector" tube is 1.9" long (the section that is inside the barrel)
https://www.choketube.com/interchange- ... -shotguns/
https://www.choketube.com/product-categ ... 1-5-flush/
The standard flush fit "Invector" tube is 1.9" long (the section that is inside the barrel)
-
- Posts: 47
- Joined: May 15th, 2021, 8:22 pm
Re: Favor
Yes this is consistent with what I found in my research last night and the picture confirms what I have is a 301 “short invector” choke.SteveRoseRAS wrote: ↑September 13th, 2022, 3:04 pm The 301 should use what Carlson refers to as "Short Invector", the tube is 1.5" inside the barrel. As far as I know that 1.5” long choke is specific to the 301
https://www.choketube.com/interchange- ... -shotguns/
https://www.choketube.com/product-categ ... 1-5-flush/
The standard flush fit "Invector" tube is 1.9" long (the section that is inside the barrel)
Appreciate the help
- Hoobilly
- Gobbler Nation
- Posts: 13335
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: Favor
Yep you got itSteveRoseRAS wrote: ↑September 13th, 2022, 3:04 pm The 301 should use what Carlson refers to as "Short Invector", the tube is 1.5" inside the barrel. As far as I know that 1.5” long choke is specific to the 301
https://www.choketube.com/interchange- ... -shotguns/
https://www.choketube.com/product-categ ... 1-5-flush/
The standard flush fit "Invector" tube is 1.9" long (the section that is inside the barrel)
Same thread pattern it’s just a shorter choke