Stevens 301T 410

the best TSS shot shell ammo made in USA
Foxtrotammo.com
Post Reply
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Stevens 301T 410

Post by Hoobilly »

So I had to buy a Stevens 410 to do some testing

With the Indiancreek 390 I’ve shot the best looking pattern thus far to the tune of 173 in the 10” circle with 9.5’s 383 Stroker Guesswho let me borrow his 2 chokes.

Unfortunately the 385 isn’t threading into my gun and he mentioned it went in a little tight in his. So the tolerances aren’t that good in these 301 410’s

To get this pattern I used Pblast last for lubricant and jb non embedding bore cleaner and then cleaned out residue and followed up with cleaning throughly with denatured alcohol. Nice shine to the barrel. Back up shot was 161 dirty with no bore snake through it.
Attachments
27EF5A87-88EE-44D7-856D-DD7F2DEC87F7.jpeg
6E077DA2-14C6-4213-B106-D9148CF61291.jpeg
Don't start none, won't be none!

https://foxtrotammo.com/
Skimerhorn
Posts: 260
Joined: January 21st, 2019, 5:35 pm

Re: Stevens 301T 410

Post by Skimerhorn »

Thats a good bit better then my factory choke. Looks like I need to try that in mine. I had to really clean my barrel good out of the box to get any kind of decent pattern
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Stevens 301T 410

Post by Hoobilly »

Skimerhorn wrote: July 24th, 2022, 2:39 pm Thats a good bit better then my factory choke. Looks like I need to try that in mine. I had to really clean my barrel good out of the box to get any kind of decent pattern
I’ve seen a lot better patterns from others using the Indiancreek 390 and the 9.5’s

Indiancreek should be making more of the 385 & 390 soon. Get with me around September and I can get you one at the GN pricing
Don't start none, won't be none!

https://foxtrotammo.com/
Samm4770
Gobbler Nation
Gobbler Nation
Posts: 1154
Joined: November 18th, 2021, 8:48 am
Location: Western New York

Re: Stevens 301T 410

Post by Samm4770 »

Nice pattern for a 410
duckslut
Posts: 108
Joined: June 4th, 2020, 12:26 pm

Re: Stevens 301T 410

Post by duckslut »

Seems like 9.5s and .390 out of these guns are the statistical ticket. I'm very close to getting 200 out of my personal loads with that setup. I want to try the new .388 and see what happens.
Attachments
IMG_20220630_203732.jpg
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Stevens 301T 410

Post by Hoobilly »

duckslut wrote: July 25th, 2022, 9:19 am Seems like 9.5s and .390 out of these guns are the statistical ticket. I'm very close to getting 200 out of my personal loads with that setup. I want to try the new .388 and see what happens.
What new 388?
Don't start none, won't be none!

https://foxtrotammo.com/
hidenorhair
Posts: 95
Joined: April 7th, 2016, 4:55 pm

Re: Stevens 301T 410

Post by hidenorhair »

9.5 custom load at 40 yds
Attachments
Screenshot_20220527-202620.png
duckslut
Posts: 108
Joined: June 4th, 2020, 12:26 pm

Re: Stevens 301T 410

Post by duckslut »

Hoobilly wrote: July 25th, 2022, 9:59 am
duckslut wrote: July 25th, 2022, 9:19 am Seems like 9.5s and .390 out of these guns are the statistical ticket. I'm very close to getting 200 out of my personal loads with that setup. I want to try the new .388 and see what happens.
What new 388?
I meant 387 IC
spider316
Gobbler Nation
Gobbler Nation
Posts: 1816
Joined: March 24th, 2017, 9:44 am

Re: Stevens 301T 410

Post by spider316 »

Hoobilly wrote: July 24th, 2022, 2:00 pm So I had to buy a Stevens 410 to do some testing

With the Indiancreek 390 I’ve shot the best looking pattern thus far to the tune of 173 in the 10” circle with 9.5’s 383 Stroker Guesswho let me borrow his 2 chokes.

Unfortunately the 385 isn’t threading into my gun and he mentioned it went in a little tight in his. So the tolerances aren’t that good in these 301 410’s

To get this pattern I used Pblast last for lubricant and jb non embedding bore cleaner and then cleaned out residue and followed up with cleaning throughly with denatured alcohol. Nice shine to the barrel. Back up shot was 161 dirty with no bore snake through it.
Should of asked me, I would've sent you one to dial in and it would only cost you a box of shells, just saying ! :dontknow:
The most experienced novice Turkey hunter the good Lord ever created !
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Stevens 301T 410

Post by Hoobilly »

spider316 wrote: July 26th, 2022, 1:23 pm
Hoobilly wrote: July 24th, 2022, 2:00 pm So I had to buy a Stevens 410 to do some testing

With the Indiancreek 390 I’ve shot the best looking pattern thus far to the tune of 173 in the 10” circle with 9.5’s 383 Stroker Guesswho let me borrow his 2 chokes.

Unfortunately the 385 isn’t threading into my gun and he mentioned it went in a little tight in his. So the tolerances aren’t that good in these 301 410’s

To get this pattern I used Pblast last for lubricant and jb non embedding bore cleaner and then cleaned out residue and followed up with cleaning throughly with denatured alcohol. Nice shine to the barrel. Back up shot was 161 dirty with no bore snake through it.
Should of asked me, I would've sent you one to dial in and it would only cost you a box of shells, just saying ! :dontknow:
:LMAO: This was definitely cheaper
Don't start none, won't be none!

https://foxtrotammo.com/
spider316
Gobbler Nation
Gobbler Nation
Posts: 1816
Joined: March 24th, 2017, 9:44 am

Re: Stevens 301T 410

Post by spider316 »

Hoobilly wrote: July 26th, 2022, 1:33 pm
spider316 wrote: July 26th, 2022, 1:23 pm
Hoobilly wrote: July 24th, 2022, 2:00 pm So I had to buy a Stevens 410 to do some testing

With the Indiancreek 390 I’ve shot the best looking pattern thus far to the tune of 173 in the 10” circle with 9.5’s 383 Stroker Guesswho let me borrow his 2 chokes.

Unfortunately the 385 isn’t threading into my gun and he mentioned it went in a little tight in his. So the tolerances aren’t that good in these 301 410’s

To get this pattern I used Pblast last for lubricant and jb non embedding bore cleaner and then cleaned out residue and followed up with cleaning throughly with denatured alcohol. Nice shine to the barrel. Back up shot was 161 dirty with no bore snake through it.
Should of asked me, I would've sent you one to dial in and it would only cost you a box of shells, just saying ! :dontknow:
:LMAO: This was definitely cheaper
:banghead:
The most experienced novice Turkey hunter the good Lord ever created !
User avatar
Riverrat
Posts: 365
Joined: June 8th, 2021, 9:58 pm

Re: Stevens 301T 410

Post by Riverrat »

Hoobilly wrote: July 24th, 2022, 2:00 pm So I had to buy a Stevens 410 to do some testing

With the Indiancreek 390 I’ve shot the best looking pattern thus far to the tune of 173 in the 10” circle with 9.5’s 383 Stroker Guesswho let me borrow his 2 chokes.

Unfortunately the 385 isn’t threading into my gun and he mentioned it went in a little tight in his. So the tolerances aren’t that good in these 301 410’s

To get this pattern I used Pblast last for lubricant and jb non embedding bore cleaner and then cleaned out residue and followed up with cleaning throughly with denatured alcohol. Nice shine to the barrel. Back up shot was 161 dirty with no bore snake through it.
Lookin good, good things to come.
Wasn't born, I was hatched!!!!!!!!!!!! and raised in Tennessee.
Feernot
Posts: 4
Joined: November 27th, 2022, 12:36 pm
Location: Arkansas

Re: Stevens 301T 410

Post by Feernot »

Hoobilly wrote: July 24th, 2022, 2:53 pm
Skimerhorn wrote: July 24th, 2022, 2:39 pm Thats a good bit better then my factory choke. Looks like I need to try that in mine. I had to really clean my barrel good out of the box to get any kind of decent pattern
I’ve seen a lot better patterns from others using the Indiancreek 390 and the 9.5’s

Indiancreek should be making more of the 385 & 390 soon. Get with me around September and I can get you one at the GN pricing
If the 390 is unavailable, should I just go with the 385? I bought my wife a Stevens 301 Turkey Thumbhole for Christmas. I'm hoping to get to pattern it on the range this winter.
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Stevens 301T 410

Post by Hoobilly »

Feernot wrote: December 7th, 2022, 10:54 am
Hoobilly wrote: July 24th, 2022, 2:53 pm
Skimerhorn wrote: July 24th, 2022, 2:39 pm Thats a good bit better then my factory choke. Looks like I need to try that in mine. I had to really clean my barrel good out of the box to get any kind of decent pattern
I’ve seen a lot better patterns from others using the Indiancreek 390 and the 9.5’s

Indiancreek should be making more of the 385 & 390 soon. Get with me around September and I can get you one at the GN pricing
If the 390 is unavailable, should I just go with the 385? I bought my wife a Stevens 301 Turkey Thumbhole for Christmas. I'm hoping to get to pattern it on the range this winter.
I would do that

And if you don’t like the patterns sell it on here and get the 390
Don't start none, won't be none!

https://foxtrotammo.com/
Post Reply

Return to “Fox Trot Ammo”