Rossi tuffy .410 ejection issues
-
- Posts: 47
- Joined: February 26th, 2017, 12:07 pm
Rossi tuffy .410 ejection issues
I just bought this gun and every time the shell won’t eject. I have to take a cleaning rod to knock it out. I’m shooting one Hal’s loads but when I shoot factory shell it works just fine. I polished the barrel but not the chamber so if anybody has any ideas please let me know. Thanks
-
- Posts: 47
- Joined: February 26th, 2017, 12:07 pm
Re: Rossi tuffy .410 ejection issues
I loaded some with 296 powder and it worked great but mp300 powder swells the hull to where I have to knock it out. I use mp300 in my savage 301 and it ejects fine.
- bowhunter2k9
- Posts: 267
- Joined: February 22nd, 2013, 6:08 pm
Re: Rossi tuffy .410 ejection issues
Dang I’ll let you know once I shoot mine. Haven’t even tried it yet
- Hoobilly
- Gobbler Nation
- Posts: 13411
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: Rossi tuffy .410 ejection issues
I had one 2 years ago before they came with plastic receivers
It shot good and ejected fine with my Foxtrotammo 383 Stroker
The ones made for the last year or so are having problems. Hit or miss on them ejecting correctly or not
It shot good and ejected fine with my Foxtrotammo 383 Stroker
The ones made for the last year or so are having problems. Hit or miss on them ejecting correctly or not
Re: Rossi tuffy .410 ejection issues
If using cheddite hulls may try fiocchi.
For crack barrel hulls, the Rocky Mt hulls are my go to.
For crack barrel hulls, the Rocky Mt hulls are my go to.
Re: Rossi tuffy .410 ejection issues
I’ve experienced this same problem with my Tristar and cheddite hulls gun wouldn’t ejected I switched to fiochhi hulls and haven’t had a problem.
-
- Posts: 47
- Joined: February 26th, 2017, 12:07 pm
Re: Rossi tuffy .410 ejection issues
I just got the gun back and it ejects fine. When I shoot it with the mp300 the brass doesn’t swell like before . It looks to me they replaced the barrel with a smaller chamber.
- bowhunter2k9
- Posts: 267
- Joined: February 22nd, 2013, 6:08 pm
Re: Rossi tuffy .410 ejection issues
Glad to hear. How long was turn around time?wvhunter74 wrote:I just got the gun back and it ejects fine. When I shoot it with the mp300 the brass doesn’t swell like before . It looks to me they replaced the barrel with a smaller chamber.
-
- Posts: 47
- Joined: February 26th, 2017, 12:07 pm