The lower the better...
The lower the better...
What is the best/lowest mount to put a red dot on a shotgun? It's a Stoeger M3020 and has the back 2 holes drilled and currently has a half of a Weaver 48339 multi slot base on it for the benelli & franchi shotguns. It's a good setup but lookin to get it lower to the receiver.
BIG BLUE NATION FOREVER
- Hoobilly
- Gobbler Nation
- Posts: 13403
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: The lower the better...
the Marlin 336 base is the thinnest. then sumtoy. but please look at the egw as its the best one I have used. solid and never loosens up one when tightened down
Re: The lower the better...
The Marlin 336 that Burris makes for the FF3 to sit on?
BIG BLUE NATION FOREVER
- Southern Sportsman
- Gobbler Nation
- Posts: 1314
- Joined: February 24th, 2013, 12:32 am
- Location: West TN
Re: The lower the better...
Yep.
I go stubbornly into error by myself, and reach my own fallacious conclusions using my own faulty data. ~Tom Kelly
- Turkinator
- Gobbler Nation
- Posts: 3006
- Joined: May 13th, 2013, 6:25 pm
- Location: southern onio
- Hoobilly
- Gobbler Nation
- Posts: 13403
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: The lower the better...
670 contour I have a couple of them. built right!
Re: The lower the better...
Do the holes on the 336 line up for the regular benelli mount? 2 close together in the back and 2 separated at the front?
BIG BLUE NATION FOREVER
- Hoobilly
- Gobbler Nation
- Posts: 13403
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: The lower the better...
-
- Posts: 331
- Joined: April 26th, 2017, 7:23 pm
- Location: Jasper, Florida
Re: The lower the better...
The 336 holes are 1/2 inch apart center to center and are 8-40 screws
- turkeyinstrut
- Gobbler Nation
- Posts: 1245
- Joined: April 13th, 2016, 12:32 pm
Re: The lower the better...
SpeedBead, you can sight right down the rib and use the bead.
Re: The lower the better...
Do make a speedbead for a Stoeger M3020?turkeyinstrut wrote: ↑July 6th, 2019, 3:09 pm SpeedBead, you can sight right down the rib and use the bead.
BIG BLUE NATION FOREVER
Re: The lower the better...
Burris says they don't make one that will fit the Stoeger, but I'm wondering if one for one of the other models will fit. ( Benelli)turkeyinstrut wrote: ↑July 6th, 2019, 3:09 pm SpeedBead, you can sight right down the rib and use the bead.
BIG BLUE NATION FOREVER
- turkeyinstrut
- Gobbler Nation
- Posts: 1245
- Joined: April 13th, 2016, 12:32 pm
Re: The lower the better...
They are not that hard to modify, I modified one to fit a 20 ga. Affinity and a 28 ga. TriStar Viper G2.KyKRAZEE wrote: ↑July 6th, 2019, 3:19 pmBurris says they don't make one that will fit the Stoeger, but I'm wondering if one for one of the other models will fit. ( Benelli)turkeyinstrut wrote: ↑July 6th, 2019, 3:09 pm SpeedBead, you can sight right down the rib and use the bead.
- Hoobilly
- Gobbler Nation
- Posts: 13403
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: The lower the better...
The way they attach are different. The Benelli has dimples on top and bottom and the dimples on the Stoeger are on the sides. This keeps them from spinning aroundKyKRAZEE wrote: ↑July 6th, 2019, 3:19 pmBurris says they don't make one that will fit the Stoeger, but I'm wondering if one for one of the other models will fit. ( Benelli)turkeyinstrut wrote: ↑July 6th, 2019, 3:09 pm SpeedBead, you can sight right down the rib and use the bead.
Re: The lower the better...
I'd like to go that route if I could. Do ya'll know which one would be the closest one to start with for the Stoeger?
BIG BLUE NATION FOREVER