Sa410 pattern

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
Skimerhorn
Posts: 260
Joined: January 21st, 2019, 5:35 pm

Sa410 pattern

Post by Skimerhorn »

20220124_163016.jpg
what are you guys thoughts on this 410 pattern? Apex 9.5, jebs choke, 35yds
SKFOOTER
Posts: 171
Joined: March 14th, 2012, 3:11 pm
Location: TENNESSEE

Re: Sa410 pattern

Post by SKFOOTER »

What size Jebs choke??
Skimerhorn
Posts: 260
Joined: January 21st, 2019, 5:35 pm

Re: Sa410 pattern

Post by Skimerhorn »

Full, never could find a restriction on it. I think it's a .390 but not sure?
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Sa410 pattern

Post by Hoobilly »

Hard to tell from a picture. Did you do the 10” circle and count how many pellets in it?

If it’s not at least 180 in the 10 consistently then I would try something else.
Don't start none, won't be none!

https://foxtrotammo.com/
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Sa410 pattern

Post by Hoobilly »

Pattern looks blown or not tight enough choke

If I had some Indiancreek chokes I would send them to you to test out.

My shells are the 7/8 oz 383 Stroker in 9.5 or 9.5x10 and the 1oz LEGEND in 9.5x10’s or 10’s
Don't start none, won't be none!

https://foxtrotammo.com/
Skimerhorn
Posts: 260
Joined: January 21st, 2019, 5:35 pm

Re: Sa410 pattern

Post by Skimerhorn »

hoobilly wrote: January 24th, 2022, 8:51 pm Pattern looks blown or not tight enough choke

If I had some Indiancreek chokes I would send them to you to test out.

My shells are the 7/8 oz 383 Stroker in 9.5 or 9.5x10 and the 1oz LEGEND in 9.5x10’s or 10’s
The pic is turned sideways for some reason? The left side as show is actually the bottom. Wish I could've found a IC, I tried. Just wa Ted to have something is why I got a jebs. Factory was close but jebs looked a lil better to me.
Skimerhorn
Posts: 260
Joined: January 21st, 2019, 5:35 pm

Re: Sa410 pattern

Post by Skimerhorn »

And that was dirty barrel. I think I can clean it and get it a lil bit tighter
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Sa410 pattern

Post by Hoobilly »

Skimerhorn wrote: January 24th, 2022, 9:19 pm And that was dirty barrel. I think I can clean it and get it a lil bit tighter
410 is the oddest of all on how they shoot. It’s like we have went back in time where you had to shoot 5 chokes and 10 different loads to find the best combo

Your gun might actually shoot best dirty. But once you have shot is polished mirror clean you won’t know. With foxtrot there is basically 2 loads that have 2 combinations. Straight or duplex
So basically 4 different loads. I’ve had to shoot all 3 Indiancreek chokes and all 4 combinations to find the sweet spot. With that being said, all 4 loads will shoot awesome from one of the three chokes
Don't start none, won't be none!

https://foxtrotammo.com/
Post Reply

Return to “Small Bore”