Does anyone have any ideas where a man can find some 28 gauge cork for tss loads? I’ve searched high and low and have came up empty. Anyone know of a good source online?
Sent from my iPhone using Tapatalk
1/8” 28 ga Cork
-
Southern Sportsman
- Gobbler Nation
- Posts: 1314
- Joined: February 24th, 2013, 12:32 am
- Location: West TN
Re: 1/8” 28 ga Cork
https://www.buffaloarms.com/cork-wad-ma ... x12x36-cwm
https://www.generaltools.com/9-16-in-hollow-steel-punch
This is probably the route I’ll go when I run out of pre-cut corks.
https://www.generaltools.com/9-16-in-hollow-steel-punch
This is probably the route I’ll go when I run out of pre-cut corks.
I go stubbornly into error by myself, and reach my own fallacious conclusions using my own faulty data. ~Tom Kelly
-
poorcountrypreacher
- Posts: 678
- Joined: July 10th, 2012, 1:39 pm
Re: 1/8” 28 ga Cork
It wouldn't take you but a few minutes to cut out 12 or 20 gauge cork to fit. Neither the shells or the turkeys will ever know the difference. 
Good luck finding what you need. I think the components shortage may be with us a long time and we will all have to improvise.
Good luck finding what you need. I think the components shortage may be with us a long time and we will all have to improvise.
Re: 1/8” 28 ga Cork
order sheets of cork from amazon, order some punches (the right sizes) and there you go. done deal.