.410 Invector threading for your barrel

Talk about 20 28 gauge & .410 bore shotguns here.
uplandridge
Posts: 19
Joined: March 4th, 2020, 12:31 pm

.410 Invector threading for your barrel

Post by uplandridge »

I have a .410 Invector Plus choke reamer and tap set that I rent if any .410 builders are interested. The Invector Plus chokes are relatively easier to find.

UPDATE
FOR ANY WORK NEEDING DONE ON BARREL THREADING FOR CHOKE TUBES OLEASE CALL OR EMAIL STEVE ROSE @ ROSE ACTION SPORTS


Gunsmith@roseactionsports.com
boykin81
Posts: 2
Joined: April 8th, 2017, 6:04 pm

Re: .410 Invector plus reamer and tap rental

Post by boykin81 »

Just had a 410 barrel made for my TC Encore and Uplandridge rented me the reamer and tap set. Highly
recommend using his products!
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13331
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: .410 Invector plus reamer and tap rental

Post by Hoobilly »

boykin81 wrote: May 27th, 2020, 5:45 pm Just had a 410 barrel made for my TC Encore and Uplandridge rented me the reamer and tap set. Highly
recommend using his products!
Most awesome!
Don't start none, won't be none!

https://foxtrotammo.com/
Jstocks
Posts: 575
Joined: July 16th, 2017, 5:27 pm

Re: .410 Invector plus reamer and tap rental

Post by Jstocks »

I may be interested.
I’m assuming you can use this on a fixed choke barrel?
2Shooter
Gobbler Nation
Gobbler Nation
Posts: 1230
Joined: January 6th, 2016, 9:18 pm
Location: North Georgia

Re: .410 Invector plus reamer and tap rental

Post by 2Shooter »

Jstocks wrote: May 27th, 2020, 10:59 pm I may be interested.
I’m assuming you can use this on a fixed choke barrel?
Yes, you will have to ream the choke out or cut the barrel off past the choke
Jstocks
Posts: 575
Joined: July 16th, 2017, 5:27 pm

Re: .410 Invector plus reamer and tap rental

Post by Jstocks »

Is this an operation that can be performed by hand, without use of machinery?
User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 3566
Joined: May 16th, 2012, 11:29 am
Location: Lowcountry, GA

Re: .410 Invector plus reamer and tap rental

Post by GLS »

Unless one is skilled, I'd either let a pro do the work with the rented tool if he didn't have it or spend the few bucks it takes for a pro to do the job with or without the rented tool. Gil
uplandridge
Posts: 19
Joined: March 4th, 2020, 12:31 pm

Re: .410 Invector plus reamer and tap rental

Post by uplandridge »

Yes, you can ream a fixed choke barrel and you need a lathe to ream the barrel.
Jstocks
Posts: 575
Joined: July 16th, 2017, 5:27 pm

Re: .410 Invector plus reamer and tap rental

Post by Jstocks »

GLS wrote: May 28th, 2020, 9:37 am Unless one is skilled, I'd either let a pro do the work with the rented tool if he didn't have it or spend the few bucks it takes for a pro to do the job with or without the rented tool. Gil
Probably best not to fool with it. I’m worried about POA/poi issues. Especially on an O/U.
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13331
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: .410 Invector plus reamer and tap rental

Post by Hoobilly »

Made this a sticky
Don't start none, won't be none!

https://foxtrotammo.com/
KyKRAZEE
Posts: 410
Joined: March 16th, 2016, 4:21 pm

Re: .410 Invector plus reamer and tap rental

Post by KyKRAZEE »

uplandridge wrote: May 27th, 2020, 3:49 pm I have a .410 Invector Plus choke reamer and tap set that I rent if any .410 builders are interested. The Invector Plus chokes are relatively easier to find.

PM for rental fees.
What about 12 or 20 gauge in Mobil threads? Does it exist?
BIG BLUE NATION FOREVER
uplandridge
Posts: 19
Joined: March 4th, 2020, 12:31 pm

Re: .410 Invector plus reamer and tap rental

Post by uplandridge »

Try

4D Rentals 406-752-2520
or
Pacific Tool and Guage 541-826-5805
jeffgrimord
Posts: 1
Joined: August 3rd, 2020, 8:10 am

Re: .410 Invector plus reamer and tap rental

Post by jeffgrimord »

uplandridge wrote: May 27th, 2020, 3:49 pm I have a .410 Invector Plus choke reamer and tap set that I rent if any .410 builders are interested. The Invector Plus chokes are relatively easier to find.

PM for rental fees.
Hi I sent a PM also Looking for an ivnector 12gauge choke tube tap and reamer rental

my email is 1ciscoccnp@gmail.com

v/r

jeff
uplandridge
Posts: 19
Joined: March 4th, 2020, 12:31 pm

Re: .410 Invector plus reamer and tap rental

Post by uplandridge »

I do not have the 12 guage invector plus.

Try

4D Rentals 406-752-2520
or
Pacific Tool and Guage 541-826-5805
Top
Kyleg160
Posts: 6
Joined: March 16th, 2021, 3:39 pm

Re: .410 Invector plus reamer and tap rental

Post by Kyleg160 »

Sent u a message uplandridge
Furyan
Posts: 41
Joined: March 5th, 2018, 3:39 pm

Re: .410 Invector plus reamer and tap rental

Post by Furyan »

Sorry to hyjack but where can these Invector plus reamer and tap be purchesed from ?
uplandridge
Posts: 19
Joined: March 4th, 2020, 12:31 pm

Re: .410 Invector plus reamer and tap rental

Post by uplandridge »

Pacific Tool and Guage 541-826-5805
Furyan
Posts: 41
Joined: March 5th, 2018, 3:39 pm

Re: .410 Invector plus reamer and tap rental

Post by Furyan »

Thank you
polaraurora
Posts: 2
Joined: November 30th, 2021, 4:21 pm

Re: .410 Invector plus reamer and tap rental

Post by polaraurora »

Hi. Came across your .410 bore reamer and tap rental. Would like to take a closer look. What tool, bushings available. What is the price. Any detailes? Would be nice to see some images.
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13331
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: .410 Invector plus reamer and tap rental

Post by Hoobilly »

polaraurora wrote: December 1st, 2021, 12:32 pm Hi. Came across your .410 bore reamer and tap rental. Would like to take a closer look. What tool, bushings available. What is the price. Any detailes? Would be nice to see some images.
he sold it to me. I sent it to a buddy to set up shop to do them for me. Probably be a month before we are ready to do barrels.
Don't start none, won't be none!

https://foxtrotammo.com/
polaraurora
Posts: 2
Joined: November 30th, 2021, 4:21 pm

Re: .410 Invector plus reamer and tap rental

Post by polaraurora »

Got it. Thanx
Tylerray378
Posts: 9
Joined: February 22nd, 2021, 10:15 pm

Re: .410 Invector plus reamer and tap rental

Post by Tylerray378 »

Hoobilly please update this post when your done. I’m considering updating my little rossi youth combo with a fixed mod. Thanks!
toasty
Posts: 595
Joined: April 19th, 2012, 11:00 am

Re: .410 Invector plus reamer and tap rental

Post by toasty »

Legit questions here. Why not just go with a Beretta/Benelli 410 choke thread? It is a standard 1/2-28 die. What does the 410 invector plus offer that the 1/2-28 doesn't?
longrangebob
Posts: 2
Joined: December 17th, 2023, 6:20 pm

Re: .410 Invector plus reamer and tap rental

Post by longrangebob »

I have an interest in renting your reamer and Tap for Invector Choke system in my 410 … please provide details
Thanx, LRB
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13331
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: .410 Invector plus reamer and tap rental

Post by Hoobilly »

longrangebob wrote: December 17th, 2023, 6:29 pm I have an interest in renting your reamer and Tap for Invector Choke system in my 410 … please provide details
Thanx, LRB
You would have to send your barrel to Steve Rose
Rose Action Sports. He now has it. I need to update this post
Don't start none, won't be none!

https://foxtrotammo.com/
Post Reply

Return to “Small Bore”