TriStar Viper G2 410 trigger fix?
-
- Posts: 352
- Joined: May 3rd, 2016, 6:36 am
TriStar Viper G2 410 trigger fix?
Anybody know of a trigger spring or anything/anybody that can adjust the trigger to a lighter pull weight?
Thanks
Casey
Thanks
Casey
Re: TriStar Viper G2 410 trigger fix?
Mcarbo has a spring kit. Same as 20 gauge Mossgerg SA. I have one on mine. Easy install
https://www.mcarbo.com/mossberg-sa-20-/ ... g-kit.aspx
https://www.mcarbo.com/mossberg-sa-20-/ ... g-kit.aspx
-
- Posts: 352
- Joined: May 3rd, 2016, 6:36 am
Re: TriStar Viper G2 410 trigger fix?
That's what I was looking for. Installed several of them on Mossbergs but did not see anything listed for the TriStar 410. I read somewhere else that the one for the 20ga would work.
Thanks
Casey
Thanks
Casey
- Hoobilly
- Gobbler Nation
- Posts: 13330
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: TriStar Viper G2 410 trigger fix?
what about a Stoeger 3020 trigger spring??? I just looked and nothing about it on their website. I will be ordering a Xbolt trigger spring and would like one for my Stoeger 20ga
Re: TriStar Viper G2 410 trigger fix?
Does the Stoeger 3020 share the same trigger group as the 3000? Mcarbo site doesn't have a listing specifically for Tristar guns, but the write up for the Mossberg SA 20/28 mentions the interchangeability with the Tristar.
- WV Ridge Reaper
- Gobbler Nation
- Posts: 1064
- Joined: July 16th, 2014, 10:19 pm
- Location: Some Where Deep In West By God Chasing A Turkey
Re: TriStar Viper G2 410 trigger fix?
Big vet...Are you say you have the Mcarbo spring in the link you posted in your tri star 410 and it does work ?
The man who passes the sentence should swing the sword
- Hoobilly
- Gobbler Nation
- Posts: 13330
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: TriStar Viper G2 410 trigger fix?
For some reason I think the spring in the 3020 is the same as what’s in the Benelli 12/20ga ?
- Hoobilly
- Gobbler Nation
- Posts: 13330
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: TriStar Viper G2 410 trigger fix?
That’s exactly what he’s sayingWV Ridge Reaper wrote: ↑February 1st, 2020, 7:41 am Big vet...Are you say you have the Mcarbo spring in the link you posted in your tri star 410 and it does work ?
Re: TriStar Viper G2 410 trigger fix?
Yes I had over a 6.5# trigger pull on my Viper measured with a digital trigger scale. Mcarbo spring reduced it to 4# +/- an ounce. Much better feel to the trigger. Easy to install if you watch Mcarbos video. Hope this helps.
- WV Ridge Reaper
- Gobbler Nation
- Posts: 1064
- Joined: July 16th, 2014, 10:19 pm
- Location: Some Where Deep In West By God Chasing A Turkey
Re: TriStar Viper G2 410 trigger fix?
Mine don’t seem that bad..I haven’t shot the gun a ton,but mine seems have a decent amount of travel..My try the spring tho just to see how it changes.
Thanks for the help
Thanks for the help
The man who passes the sentence should swing the sword
- hookedspur
- Gobbler Nation
- Posts: 2368
- Joined: May 24th, 2012, 8:44 pm
- Location: Ohio
Re: TriStar Viper G2 410 trigger fix?
Mines not bad at all.
-
- Posts: 352
- Joined: May 3rd, 2016, 6:36 am
Re: TriStar Viper G2 410 trigger fix?
Just got my TriStar this evening, I already had the MCARBO spring for the SA20, so while cleaning the gun I put the new spring in. Trigger pull measures 5lb. Not really happy with that, would like it around 3. I did not even measure the factory trigger pull but I did dry fire it a time or two and the MCARBO did slightly lighten the pull. Is there any body that will work on these triggers?
I am going to check tomorrow and make sure everything is right as there are two holes where the trigger pin goes through and I am pretty sure I got it right but I am gonna make sure tomorrow evening. Does anyone know which hole the pin should go through?
Thanks
Casey
I am going to check tomorrow and make sure everything is right as there are two holes where the trigger pin goes through and I am pretty sure I got it right but I am gonna make sure tomorrow evening. Does anyone know which hole the pin should go through?
Thanks
Casey
- WV Ridge Reaper
- Gobbler Nation
- Posts: 1064
- Joined: July 16th, 2014, 10:19 pm
- Location: Some Where Deep In West By God Chasing A Turkey
Re: TriStar Viper G2 410 trigger fix?
I got mine installed to night..Thanks bigvet!!
The man who passes the sentence should swing the sword
Re: TriStar Viper G2 410 trigger fix?
Glad to help. Helped my trigger a bunch.
-
- Posts: 352
- Joined: May 3rd, 2016, 6:36 am
Re: TriStar Viper G2 410 trigger fix?
What did you get your trigger down to in pull weight Bigvet?
Mine dropped from 6 to 5lbs with MCARBO spring.
Casey
Mine dropped from 6 to 5lbs with MCARBO spring.
Casey
Re: TriStar Viper G2 410 trigger fix?
Went from 6.5# to 4# +/- on my digital trigger scale. My sear surfaces were pretty smooth already. Left them alone except for greasing the contact surface. Not Timney good but better than stock. Probably had 150 rounds shot thru it already at doves, no problems so far.