410 Gauge constriction .380, .385, .390

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
hunt123hunt
Posts: 27
Joined: December 6th, 2017, 3:25 pm

410 Gauge constriction .380, .385, .390

Post by hunt123hunt »

Considering purchasing an Indian Creek choke tube for a TriStar turkey gun in 410 gauge, what size constriction do you think would work best for federal #9 shot tss.
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: 410 Gauge constriction .380, .385, .390

Post by Hoobilly »

Not saying 100%. This is Andy Terrells Tristar with the load he is shooting and a 380 indiancreek

In my invector plus BPS it loves the 390
Attachments
627DF002-22BE-42E0-9659-D564A76865B7.jpeg
Don't start none, won't be none!

https://foxtrotammo.com/
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: 410 Gauge constriction .380, .385, .390

Post by Hoobilly »

I might add.. he said he had shot all other manufacturers 385 chokes and it would only hit the low 140’s
Don't start none, won't be none!

https://foxtrotammo.com/
BrowningGuy88
Posts: 750
Joined: February 13th, 2013, 9:01 am

Re: 410 Gauge constriction .380, .385, .390

Post by BrowningGuy88 »

I think you have to consider that all guns vary a little. Sure there are trends to what they like and that’s where you start, but each one can be different.

Best I remember if you buy direct from IC, they will let you swap chokes til you are satisfied.
liv2hnt
Posts: 142
Joined: April 23rd, 2016, 9:26 am

Re: 410 Gauge constriction .380, .385, .390

Post by liv2hnt »

I would start with 385 if I wanted to shoot 9s, and if I wanted to go smaller to 9.5 or 10s, I would start with 380. Just my experience with 3 different 410s and you will definitely get better performance out of TSS 9.5 or 10 in the 410.

Good luck.
jsh909
Gobbler Nation
Gobbler Nation
Posts: 1159
Joined: May 11th, 2019, 7:12 am
Location: Ohio

Re: 410 Gauge constriction .380, .385, .390

Post by jsh909 »

hoobilly wrote: January 11th, 2020, 7:59 am Not saying 100%. This is Andy Terrells Tristar with the load he is shooting and a 380 indiancreek

In my invector plus BPS it loves the 390
Damn, that is a killer right there. Looks like a 2-1/4 lead 5 load out of my 10ga. Hard to argue with that pattern!
Cwcook68
Posts: 18
Joined: February 13th, 2018, 12:30 pm

Re: 410 Gauge constriction .380, .385, .390

Post by Cwcook68 »

Bought a 380 from Hoobilly,hope my Savage 301T shoots like Terrrells Tristar. Thanks Mr. Hoobilly, fixin to order some 383 Strokers from you Sir. And by the way , Not sure many turkey hunters know what a 383 stroker is but working in racing for most of my life I know it’s hard to beat a small block with lots of cubic inches and a big ole carb.
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: 410 Gauge constriction .380, .385, .390

Post by Hoobilly »

BrowningGuy88 wrote: January 11th, 2020, 9:37 am I think you have to consider that all guns vary a little. Sure there are trends to what they like and that’s where you start, but each one can be different.

Best I remember if you buy direct from IC, they will let you swap chokes til you are satisfied.
not just yet on these 410 chokes. due to the time frame with turkey season approaching and the limited supply of chokes for this spring they just can't do that right now. probably next year
Don't start none, won't be none!

https://foxtrotammo.com/
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: 410 Gauge constriction .380, .385, .390

Post by Hoobilly »

Cwcook68 wrote: January 11th, 2020, 4:16 pm Bought a 380 from Hoobilly,hope my Savage 301T shoots like Terrrells Tristar. Thanks Mr. Hoobilly, fixin to order some 383 Strokers from you Sir. And by the way , Not sure many turkey hunters know what a 383 stroker is but working in racing for most of my life I know it’s hard to beat a small block with lots of cubic inches and a big ole carb.
:thumbup: :thumbup: :thumbup: :thumbup:

not many know that at all
Don't start none, won't be none!

https://foxtrotammo.com/
User avatar
WV Ridge Reaper
Gobbler Nation
Gobbler Nation
Posts: 1064
Joined: July 16th, 2014, 10:19 pm
Location: Some Where Deep In West By God Chasing A Turkey

Re: 410 Gauge constriction .380, .385, .390

Post by WV Ridge Reaper »

I went with a 380 myself for my tristar it’s getting dipped right now..Haven’t shot tss in it yet not much help.

I will say don’t wait long to get a choke because they won’t be around long this year..Very limited supply of them from what I was told


Sent from my iPhone using Tapatalk
The man who passes the sentence should swing the sword
BrowningGuy88
Posts: 750
Joined: February 13th, 2013, 9:01 am

Re: 410 Gauge constriction .380, .385, .390

Post by BrowningGuy88 »

hoobilly wrote: January 11th, 2020, 6:34 pm
BrowningGuy88 wrote: January 11th, 2020, 9:37 am I think you have to consider that all guns vary a little. Sure there are trends to what they like and that’s where you start, but each one can be different.

Best I remember if you buy direct from IC, they will let you swap chokes til you are satisfied.
not just yet on these 410 chokes. due to the time frame with turkey season approaching and the limited supply of chokes for this spring they just can't do that right now. probably next year
Makes sense!
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13330
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: 410 Gauge constriction .380, .385, .390

Post by Hoobilly »

WV Ridge Reaper wrote: January 11th, 2020, 7:32 pm I went with a 380 myself for my tristar it’s getting dipped right now..Haven’t shot tss in it yet not much help.

I will say don’t wait long to get a choke because they won’t be around long this year..Very limited supply of them from what I was told


Sent from my iPhone using Tapatalk
I am looking forward to the patterns and dead gobbler pictures from these IC chokes this spring.
Don't start none, won't be none!

https://foxtrotammo.com/
Post Reply

Return to “Small Bore”