.410 Invector threading for your barrel
-
- Posts: 19
- Joined: March 4th, 2020, 12:31 pm
.410 Invector threading for your barrel
I have a .410 Invector Plus choke reamer and tap set that I rent if any .410 builders are interested. The Invector Plus chokes are relatively easier to find.
UPDATE
FOR ANY WORK NEEDING DONE ON BARREL THREADING FOR CHOKE TUBES OLEASE CALL OR EMAIL STEVE ROSE @ ROSE ACTION SPORTS
Gunsmith@roseactionsports.com
UPDATE
FOR ANY WORK NEEDING DONE ON BARREL THREADING FOR CHOKE TUBES OLEASE CALL OR EMAIL STEVE ROSE @ ROSE ACTION SPORTS
Gunsmith@roseactionsports.com
Re: .410 Invector plus reamer and tap rental
Just had a 410 barrel made for my TC Encore and Uplandridge rented me the reamer and tap set. Highly
recommend using his products!
recommend using his products!
- Hoobilly
- Gobbler Nation
- Posts: 13411
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: .410 Invector plus reamer and tap rental
Most awesome!
Re: .410 Invector plus reamer and tap rental
I may be interested.
I’m assuming you can use this on a fixed choke barrel?
I’m assuming you can use this on a fixed choke barrel?
Re: .410 Invector plus reamer and tap rental
Is this an operation that can be performed by hand, without use of machinery?
Re: .410 Invector plus reamer and tap rental
Unless one is skilled, I'd either let a pro do the work with the rented tool if he didn't have it or spend the few bucks it takes for a pro to do the job with or without the rented tool. Gil
-
- Posts: 19
- Joined: March 4th, 2020, 12:31 pm
Re: .410 Invector plus reamer and tap rental
Yes, you can ream a fixed choke barrel and you need a lathe to ream the barrel.
Re: .410 Invector plus reamer and tap rental
Probably best not to fool with it. I’m worried about POA/poi issues. Especially on an O/U.
- Hoobilly
- Gobbler Nation
- Posts: 13411
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: .410 Invector plus reamer and tap rental
Made this a sticky
Re: .410 Invector plus reamer and tap rental
What about 12 or 20 gauge in Mobil threads? Does it exist?uplandridge wrote: ↑May 27th, 2020, 3:49 pm I have a .410 Invector Plus choke reamer and tap set that I rent if any .410 builders are interested. The Invector Plus chokes are relatively easier to find.
PM for rental fees.
BIG BLUE NATION FOREVER
-
- Posts: 19
- Joined: March 4th, 2020, 12:31 pm
Re: .410 Invector plus reamer and tap rental
Try
4D Rentals 406-752-2520
or
Pacific Tool and Guage 541-826-5805
4D Rentals 406-752-2520
or
Pacific Tool and Guage 541-826-5805
-
- Posts: 1
- Joined: August 3rd, 2020, 8:10 am
Re: .410 Invector plus reamer and tap rental
Hi I sent a PM also Looking for an ivnector 12gauge choke tube tap and reamer rentaluplandridge wrote: ↑May 27th, 2020, 3:49 pm I have a .410 Invector Plus choke reamer and tap set that I rent if any .410 builders are interested. The Invector Plus chokes are relatively easier to find.
PM for rental fees.
my email is 1ciscoccnp@gmail.com
v/r
jeff
-
- Posts: 19
- Joined: March 4th, 2020, 12:31 pm
Re: .410 Invector plus reamer and tap rental
I do not have the 12 guage invector plus.
Try
4D Rentals 406-752-2520
or
Pacific Tool and Guage 541-826-5805
Top
Try
4D Rentals 406-752-2520
or
Pacific Tool and Guage 541-826-5805
Top
Re: .410 Invector plus reamer and tap rental
Sent u a message uplandridge
Re: .410 Invector plus reamer and tap rental
Sorry to hyjack but where can these Invector plus reamer and tap be purchesed from ?
-
- Posts: 19
- Joined: March 4th, 2020, 12:31 pm
Re: .410 Invector plus reamer and tap rental
Pacific Tool and Guage 541-826-5805
-
- Posts: 2
- Joined: November 30th, 2021, 4:21 pm
Re: .410 Invector plus reamer and tap rental
Hi. Came across your .410 bore reamer and tap rental. Would like to take a closer look. What tool, bushings available. What is the price. Any detailes? Would be nice to see some images.
- Hoobilly
- Gobbler Nation
- Posts: 13411
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: .410 Invector plus reamer and tap rental
he sold it to me. I sent it to a buddy to set up shop to do them for me. Probably be a month before we are ready to do barrels.polaraurora wrote: ↑December 1st, 2021, 12:32 pm Hi. Came across your .410 bore reamer and tap rental. Would like to take a closer look. What tool, bushings available. What is the price. Any detailes? Would be nice to see some images.
-
- Posts: 2
- Joined: November 30th, 2021, 4:21 pm
Re: .410 Invector plus reamer and tap rental
Got it. Thanx
-
- Posts: 9
- Joined: February 22nd, 2021, 10:15 pm
Re: .410 Invector plus reamer and tap rental
Hoobilly please update this post when your done. I’m considering updating my little rossi youth combo with a fixed mod. Thanks!
Re: .410 Invector plus reamer and tap rental
Legit questions here. Why not just go with a Beretta/Benelli 410 choke thread? It is a standard 1/2-28 die. What does the 410 invector plus offer that the 1/2-28 doesn't?
-
- Posts: 2
- Joined: December 17th, 2023, 6:20 pm
Re: .410 Invector plus reamer and tap rental
I have an interest in renting your reamer and Tap for Invector Choke system in my 410 … please provide details
Thanx, LRB
Thanx, LRB
- Hoobilly
- Gobbler Nation
- Posts: 13411
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: .410 Invector plus reamer and tap rental
You would have to send your barrel to Steve Roselongrangebob wrote: ↑December 17th, 2023, 6:29 pm I have an interest in renting your reamer and Tap for Invector Choke system in my 410 … please provide details
Thanx, LRB
Rose Action Sports. He now has it. I need to update this post