Search found 229 matches
- February 2nd, 2019, 10:17 am
- Forum: Gobbler Talk
- Topic: South Carolina DNR recommendations for changes to turkey season
- Replies: 50
- Views: 16001
Re: South Carolina DNR recommendations for changes to turkey season
This is crazy considering they JUST pushed opening from April 1 back into March. So after a very short period they have determined that didn’t work? Lol.
- April 8th, 2018, 9:02 am
- Forum: Gobbler Talk
- Topic: Don't tell anyone
- Replies: 11
- Views: 4968
Re: Don't tell anyone
That's an obvious problem. I hunt private land in a State that allows rifles for private land gobblers. If I'm going to shoot a 100 yard bird it will be with something a lot more economical than a $10.00 shotgun shell. Btw - I frequent both this forum and that "other forum". Enjoy them bo...
- March 8th, 2018, 4:39 pm
- Forum: Gun Talk
- Topic: 870 12 vs 20 receiver/stock interface angle
- Replies: 0
- Views: 1305
870 12 vs 20 receiver/stock interface angle
Is the angle between the stock and receiver the same on the 870 12s and 20s?
I may try my hand at making a speedbead for the 20 gauge if so.
I may try my hand at making a speedbead for the 20 gauge if so.
- March 7th, 2018, 7:33 pm
- Forum: Gun Talk
- Topic: Drill and Tap 870
- Replies: 35
- Views: 20004
Re: Drill and Tap 870
Even on a 20 gauge there is an insane amount of metal on the top of the receiver. In fact, my mount screws only go about half way through and they torque up just fine.
Those guys are nuts.
Those guys are nuts.
- February 25th, 2018, 9:36 pm
- Forum: Small Bore
- Topic: 1/8 28 gauge cork
- Replies: 3
- Views: 2182
Re: 1/8 28 gauge cork
PM sent
- February 22nd, 2018, 1:00 pm
- Forum: Gun Talk
- Topic: Federal TSS - Just thinking outloud...
- Replies: 25
- Views: 67622
Re: Federal TSS - Just thinking outloud...
Nah they’re roll crimped. They used an overshot card that looks like a fold crimp.taylorjones20 wrote: ↑February 20th, 2018, 11:24 amI thought the longbeards had some type of fold and roll crimp.
- February 20th, 2018, 12:46 am
- Forum: Gun Talk
- Topic: Federal TSS - Just thinking outloud...
- Replies: 25
- Views: 67622
Re: Federal TSS - Just thinking outloud...
I just found it odd that I haven't see a company with a roll crimp turkey load until they came out with the TSS. I just figured someone from Federal is a member of this form or lurking around. :dontknow: :shock: Longbeards are roll crimped True, but not a traditional roll crimp. I'm not sure what y...
- February 18th, 2018, 5:26 pm
- Forum: Small Bore
- Topic: 20ga O/U BUILD IDEAS
- Replies: 8
- Views: 4344
Re: 20ga O/U BUILD IDEAS
I really saw no other options aside from the CZ Mallard that has 2 triggers. I got one a couple of years back and had Briley make an eccentric choke for the bottom barrel.
- February 15th, 2018, 8:51 pm
- Forum: Gun Talk
- Topic: Burris Fastfire deal
- Replies: 5
- Views: 2580
Re: Burris Fastfire deal
I get cabelas gift cards at 20% off and I still passed on this deal this time around. Prices on the 332 and the FF3 are so far down I couldn't hardly even make it work.
- February 15th, 2018, 8:49 pm
- Forum: Gun Talk
- Topic: Federal TSS - Just thinking outloud...
- Replies: 25
- Views: 67622
Re: Federal TSS - Just thinking outloud...
Longbeards are roll crimpedtaylorjones20 wrote: ↑February 14th, 2018, 12:51 pm I just found it odd that I haven't see a company with a roll crimp turkey load until they came out with the TSS. I just figured someone from Federal is a member of this form or lurking around.
- November 10th, 2017, 7:56 pm
- Forum: Gobbler Talk
- Topic: Gobbler Lodge??
- Replies: 2
- Views: 1982
Gobbler Lodge??
Does the Gobbler Lodge in New York still exist? I think that's what it was called.
Any info would be great, i've lost the post.
Any info would be great, i've lost the post.
- May 6th, 2017, 10:23 am
- Forum: Small Bore
- Topic: 870 20ga compact or full size?
- Replies: 2
- Views: 1539
Re: 870 20ga compact or full size?
The 21" barrel is why, I replaced the stock on mine anyways. I actually bought the Compact Jr which has a 18-3/4" barrel but I couldn't get the results I wanted out of that particular barrel. So, my wife and I swapped barrels, and her 21" wasn't great either. I ended up doing the Remi...
- March 13th, 2017, 10:47 pm
- Forum: Collectors Room
- Topic: Some Bones From Brams Bones
- Replies: 5
- Views: 3013
Re: Some Bones From Brams Bones
I had one of Bram's bones, identical to the one in the middle.
I had it in a cargo pocket and sat down to call a turkey, I guess my pants got tight and it snapped it in 2.
I glued it back together and it still runs, it's just not as pretty.
I had it in a cargo pocket and sat down to call a turkey, I guess my pants got tight and it snapped it in 2.
I glued it back together and it still runs, it's just not as pretty.
- March 12th, 2017, 10:10 pm
- Forum: Gobbler Talk
- Topic: SON OF A B_____
- Replies: 20
- Views: 4687
Re: SON OF A B_____
Mine never stays logged in, i pretty much always have to log in to make a reply. Half the time it's not worth it.
- March 12th, 2017, 9:50 pm
- Forum: Gobbler Talk
- Topic: SON OF A B_____
- Replies: 20
- Views: 4687
Re: SON OF A B_____
WHUTJohndoe wrote:I don't come on as much and I came on this morning and the sight kicked me off in just a few hrs.
Guess I'll come back even less.
- March 12th, 2017, 8:14 pm
- Forum: Camp Dinner
- Topic: Venison Machaca
- Replies: 20
- Views: 9461
Re: Venison Machaca
So I made this today, and it was excellent. I did use chuck roast, because we decided to make it at like 10 am, and my parents were here so I didn't have time to that venison since they had to leave by like 5:30. I've made similar dishes, but I think this was probably better than the others. I could...
- March 7th, 2017, 8:26 pm
- Forum: Gun Talk
- Topic: Cheap Burris FastFire III
- Replies: 23
- Views: 10592
Re: Cheap Burris FastFire III
Wrong fast fireyelpy wrote:Be carefull what you click on on the site. It just crashed my laptop and won't restart.
Sent from my SCH-I545PP using Tapatalk
- March 5th, 2017, 10:26 am
- Forum: Gun Talk
- Topic: Plastic Solvent
- Replies: 8
- Views: 3041
Re: Plastic Solvent
Any experience with either of these? http://www.cabelas.com/product/Birchwood-Casey-Bore-Scrubber-in-Bore-Cleaner/709888.uts?searchPath=%2Fbrowse.cmd%3FcategoryId%3D734095080%26CQ_search%3Dplastic%2Bsolvent http://www.cabelas.com/product/BIRCHWOOD-BORE-SCRUBBER-FOAM/1859968.uts?searchPath=%2Fbrowse....
- March 5th, 2017, 10:24 am
- Forum: Gun Talk
- Topic: Plastic Solvent
- Replies: 8
- Views: 3041
Plastic Solvent
What solvent are you guys using now that's pretty easy to get your hands on, and also eats plastic?
- March 5th, 2017, 8:59 am
- Forum: Big Bore
- Topic: First 12ga TSS Rem 870 IC .665 3" 2oz 8's
- Replies: 14
- Views: 7263
Re: First 12ga TSS Rem 870 IC .665 3" 2oz 8's
The number of pellets per ounce can be off for many reasons, most likely the density is higher than expected. Also, they could be slightly oversized. It's nothing to sweat, but very few batches come out exact.
- February 22nd, 2017, 6:41 pm
- Forum: Gun Talk
- Topic: M3500 Value
- Replies: 0
- Views: 853
M3500 Value
I have a max-4 Stoeger M3500 with a Steady Grip and original stock, SpeedBead with FF3, Truglo Magnum Gobble-Dot Pro, and Rob Roberts trigger job. Do you think $800 is a fair starting number?
- February 12th, 2017, 8:50 pm
- Forum: Gun Talk
- Topic: CZ Mallard Barrel Regulation
- Replies: 16
- Views: 4670
Re: CZ Mallard Barrel Regulation
I've sent an O/U to Briley for regulation correction before. They re-threaded the barrels and put it spot on. There was a little back and forth to convince them regulation should be spot on for windage at around 15 yards, but they did it. And it was for free, because they do Yildiz for free. Yildiz...
- February 12th, 2017, 8:49 pm
- Forum: Gun Talk
- Topic: CZ Mallard Barrel Regulation
- Replies: 16
- Views: 4670
Re: CZ Mallard Barrel Regulation
Briley made me an eccentric choke for a Beretta O/U some years ago. It did work just fine and the process with Briley went very smoothly. That gun was off 8" vertically at 30 yards. If you were to go that route, I would look at doing the eccentric choke on the barrel you plan to have the more ...
- February 12th, 2017, 8:47 pm
- Forum: Gun Talk
- Topic: CZ Mallard Barrel Regulation
- Replies: 16
- Views: 4670
Re: CZ Mallard Barrel Regulation
8-10" is extreme, but I have seen worse, almost double that, out of a Luxus F3, needless to say that gun got sent back to Blaser. Over the phone when he told them it was a ft. and half high at 20 yds they thought he was crazy. When they got the gun and shot it they called him back and said wow...
- February 12th, 2017, 8:08 am
- Forum: Gun Talk
- Topic: CZ Mallard Barrel Regulation
- Replies: 16
- Views: 4670
Re: CZ Mallard Barrel Regulation
I understand everything you're saying, however the gap is larger at 40 yds than at 30. 30 yds was chosen because that is the routine that Briley has you follow so that they know how to cut the chokes. Firing 3 shots with each barrel (I actually did the test 2 different times for a total of 12 shots)...