picture of gun. Monstrum mount, FF3, MCARBO trigger springs.
Casey
Search found 153 matches
- February 12th, 2024, 9:32 am
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
- February 12th, 2024, 9:27 am
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
835 With a couple different chokes and a Handload I load.
Casey
Casey
- February 12th, 2024, 9:26 am
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
835 With a couple different chokes and a Handload I load.
Casey
Casey
- February 9th, 2024, 6:58 am
- Forum: Small Bore
- Topic: Trigger spring kit
- Replies: 10
- Views: 645
Re: Trigger spring kit
Used both and they work great.
Casey
Casey
- February 7th, 2024, 9:37 am
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Need to thin the heard a little so some of the guns are for sale. I also have a 870 20" barrel Shur-Shot stock with Vorq extractor, aluminum follower with xtra power mag spring, Drilled/tapped with FF3, cerakoted metal and dipped stocks but I don't have a picture of it. PM me if interested in a...
- February 5th, 2024, 7:05 pm
- Forum: Small Bore
- Topic: Mossberg 500 Guidence .410
- Replies: 14
- Views: 752
Re: Mossberg 500 Guidence .410
Cause I got a Tri-star auto and I don't pack either hardly. Needing to thin the heard a little.
Casey
Casey
- February 5th, 2024, 4:48 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Another 1187 20ga Picture.
Casey
Casey
- February 5th, 2024, 4:41 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
11-87 20ga, metal Cerakoted in Mag-Pul OD Green, Sure-Shot Stocks dipped in Green Leaf by Ethridge. Timney Trigger Springs, Drilled/Tapped by Sumtoy for Sumtoy base and FF3, Indian Creek .555. Shoots my 3" Handload in the low to mid 300's.
Casey
Casey
- February 5th, 2024, 4:36 pm
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
Old School 11-87 turkey gun I bought new in early 90's. Killed a North American Slam with this gun prior to retiring it. It has had many different chokes and loads fired out of it but I broke it out a couple years ago to see what it would do with the new TSS and my handloads. Using factory turkey ch...
- February 5th, 2024, 3:53 pm
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
Here is another of my SBE1 Steadygrip and the Ugly guy with a beautiful Alabama Gobbler.
- February 5th, 2024, 3:41 pm
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
Next is my SBE Steadygrip I bought when they first came out. Been on many a hunt and I usually carry it when I go out of state hunting. SBE1, Taran Tactical Trigger springs, Sumtoy Base with FF3, Drilled/Tapped by Rob Roberts, Indian Creek .665, God A Grip cheek riser. Does great with Apex 3.5"...
- February 5th, 2024, 3:29 pm
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
Here is my M1 Steadygrip with 21" barrel, Trigger springs, Scalarworks mount with Holosun 407C, Xtra Power recoil spring, dipped by Ethridge, Indian Creek .665, God a Grip Cheek riser. Loves Apex 3" 2.25 and does well with my 3" and 2 3/4" handloads.
- February 5th, 2024, 3:09 pm
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Re: Big Bores I have put together
Gold Light NWTF 10ga with Indian Creek .690, Sumtoy Base and FF3. Does in the high 500's to low 600's with my handloads
Finish is getting a little tacky as a lot of the Browning Dura Coat guns do. I need to send it back but hate to lose the NWTF insignia on butt stock.
Casey
Finish is getting a little tacky as a lot of the Browning Dura Coat guns do. I need to send it back but hate to lose the NWTF insignia on butt stock.
Casey
- February 5th, 2024, 3:00 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Here is my other 3020 that I use Williams Fire Sights on. I on purpose use a Carlson .575 to try and give me some wiggle room. The Carlson has produced nice 50/50 groups in several guns in the past and does with this one also. Trigger springs installed, barrel shortened same as the 3020 I run a FF3 ...
- February 5th, 2024, 2:52 pm
- Forum: Big Bore
- Topic: Big Bores I have put together
- Replies: 13
- Views: 715
Big Bores I have put together
Will share pictures of a few big bores I have put together since I started a thread about small bores. Browning BPS 10ga Use several chokes that do great. Barrel was chopped to around 20" and threaded for Tru-Threads. Rob Roberts did a trigger job and Sumtoy drilled/tapped for FF 3 base. Ethrid...
- February 5th, 2024, 2:36 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Here is one of my Stoeger 3020's
Casey
Casey
- February 5th, 2024, 2:15 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Already posted this before but will add it to this thread. Weatherby Element 20ga Turkey model.
Casey
Casey
- February 5th, 2024, 2:03 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Got 3 835's 20" barreled guns also. I enjoy setting them up and the mossbergs are easy to set up and are great turkey killers.
Need to thin the heard a bit! Lol yes its an addiction!
Casey
Need to thin the heard a bit! Lol yes its an addiction!
Casey
- February 5th, 2024, 12:33 pm
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
The 500 Bantam in first set of pictures is the 20" or 21" barreled gun with wood furniture that I covered with Mossy Oak graphics kit. Installed a Monstrum mount, MCARBO trigger springs, and Burris FF3. It has an Indian Creek .555. The 5I0 I had dipped at Ethridge. I had an extra butt stoc...
- February 5th, 2024, 11:57 am
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Figured out how to resize.
Picture of 510 Bantam 20ga.
Casey
Picture of 510 Bantam 20ga.
Casey
- February 5th, 2024, 11:38 am
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Re: Small gauges that I have put together
Top 2 patterns are from a 510 Bantam but l not let me post pictures of gun, says file 2 large.
Casey
Casey
- February 5th, 2024, 10:57 am
- Forum: Small Bore
- Topic: Small gauges that I have put together
- Replies: 13
- Views: 555
Small gauges that I have put together
Figured I would share a few pictures of some smaller gauges I have put together just for conversation.
Casey
Casey
- February 5th, 2024, 10:46 am
- Forum: Small Bore
- Topic: Mossberg 500 Guidence .410
- Replies: 14
- Views: 752
Re: Mossberg 500 Guidence .410
I like the 10's in mine. I also have a Tri-Star 410 that I shoot same load out of, I believe it has an Indian Creek but can't recall what constriction. It will hover around 200 in 10" at 40 yards and I believe that 40 is far enough for a 410 with its sparce payload so 10's should do fine at tha...
- February 5th, 2024, 10:40 am
- Forum: Small Bore
- Topic: Mossberg 500 Guidence .410
- Replies: 14
- Views: 752
Re: Mossberg 500 Guidence .410
Here is mine. I believe I t has a Jebs XX Full but I have not tried an Indian Creek yet as I plan on selling it.
Casey
Casey
- February 2nd, 2024, 12:32 am
- Forum: Gun Talk
- Topic: Gunsmith to drill and tap WBY Element?
- Replies: 18
- Views: 35312
Re: Gunsmith to drill and tap WBY Element?
Mr. Rose did my Weatherby Element and it's perfect!
Casey
Casey