Gobbler Nation

Which gauge is your new 301?

Not your usual 20ga on the opening day of Kentucky's 2024 season... A friend ours with his Flintlock loaded with #7 TSS and real black powder.

Our first client success picture of 2024 (and not exactly what you might have expected). Send us a picture when get one!

Mr. Rose did 2 more barrels for me. 20ga Remington cut to 18 1/2" and a choke install on a .410 NE Firearms. 20ga literally shot POI to the red dot after I reinstalled the barrel and IC .555 choke. My advice is just send the Man the barrels and be done with it, trying to find a barrel for what...

We cut and threaded one for a neighbor of yours earlier this week. Threaded it for Tru-Choke tubes (not enough barrel wall thickness for anything else) and made a kinda decorative half round cut on the end of the rib.... Forgot to take a picture...Sorry :( (If you know Dusty ask him to show it to you)

Guys understand it’s not just soldering barrels together and being done. That’s what many companies do. They won’t hit similar poa. They’ll never hit exact anyhow but cheap guns just will be further inconsistent. Browning is a good example of a company adjusts/checks barrels but there cost is much ...

Thunder17 wrote: ↑January 3rd, 2024, 7:31 pm

Hognutz wrote: ↑January 3rd, 2024, 12:22 pm How about Steve Rose. SteveRoseRAS
Steve Rose Action Sports.
He’s an active member and comes with high acclaim.

I’ll give him a call, thanks!

We can do it and have it back in plenty of time for Turkey season (just don't too long to send it)

www.roseactionsports.com

Thanx … not sure that is suitable as I have an Old SXS and intended to drill out the barrels slowly by Hand … I’ll contact him thank you Threading cut down double barrel can be tricky, we will inspect the the barrel to barrel solder joints and connections to make these are all secure and in good sh...

longrangebob wrote: ↑December 17th, 2023, 6:29 pm I have an interest in renting your reamer and Tap for Invector Choke system in my 410 … please provide details
Thanx, LRB

Send a email to gunsmith@roseactionsports.com We can send more info about getting your .410 barrel threaded for screw in Invector choke tubes.

Thanks,

Mine is a .40. Jim Kibler makes them in .32, .36, .40 and .45

spider316 wrote: ↑August 22nd, 2023, 8:35 pm

Mr. Rose is that an original or reproduction ? Either way its definitely a very fine piece !!!!!

Thanks. It is a contemporary gun I put together 3-4 years ago using a Jim Kibler kit https://kiblerslongrifles.com/

That Vintagers Shoot is something I could get in to, too bad my bank account disagrees. The closest I can get is squirrel hunting with my old flintlock. https://scontent-ord5-2.xx.fbcdn.net/v/t39.30808-6/369148903_10227766339202521_4423006547431812370_n.jpg?stp=cp6_dst-jpg&_nc_cat=102&ccb=1-...

Anyone have a Stoeger M3000/3500 and M3020 handy? I need a favor please..... Can you tell me if the grip cap insert is the same size in both the 12ga and 20ga stock?

Dirty Rice is one of our Deer Camp staples. Start with a box of Zatarain's, extra sausage and vegetables, add some corn bread and everyone is happy.

Sent the Man a 20 ga barrel from Mossberg 500. He cut off the old Colonial threads and returned it to the factory Moss/WIN thread, measures right at 21 1/4". Gonna make a turkey killa out of it. Turn around time was 4 weeks as stated, definitely a top notch shop ! :thumbup: Thanks for the kind...

If you are looking at the EGW optic base for the SBE,then yes the hole spacing will match the Benelli factory holes. https://www.egwguns.com/remington-4-6-7 ... rail-0-moa

Issue with feeding, come to find out was caused by the Lead Sled so that not an issue. Forearm looseness an issue with the FFT after market forearm which I replaced with a Benelli factory forearm. But the issue now is with the dinging of the finish on the ejection port . I replaced recoil spring wi...

As far as the Nova, can someone confirm that they are designed that the carrier is in up position or not? Casey It is working as designed. The Nova and Super Nova (pump gun) carrier will move up when you loads shell(s) into the tube and remain up until you open the action. And shooting the inertia ...

Here's something I recently posted here. If your barrel meets the minimum measurements listed we can cut and thread it for some type of 20ga tube. Send us a message or email for more into. The suitability of threading a cut down barrel generally comes down to two things; availability of the install...

The suitability of threading a cut down barrel generally comes down to two things; availability of the installation tooling for the choke tube thread style and adequate barrel wall thickness to accept the threading. The Italian guns often have a barrel that is thinner though the mid section (you'll ...

The suitability of threading a cut down barrel generally comes down to two things; availability of the installation tooling for the choke tube thread style and adequate barrel wall thickness to accept the threading. The Italian guns often have a barrel that is thinner though the mid section (you'll ...

Don’t quote me on this I bought a sa28 gauge last year and I reached out to mossberg looking for replacement parts and they Told me them guns come complete from turkey and they don’t carry any parts for them . I asked if anything would cross reference they also told me no. Little strange you buy a ...

Hoobilly wrote: ↑February 16th, 2023, 7:41 am I’ve seen someone mount a base to one. Can’t remember if it’s a 12 or 20ga

Here's an optic mounted behind the 20ga top cover (on the solid section of the receiver). This picture came from the GN FB group.

One of my local guys with a 20ga SBE III stopped in and let me have an observation. The top cover had enough movement (when installed on the gun) that I would be concerned with eventual loss of zero with an optic mounted on the cover. The tightness, or lack thereof, of the top cover fitting may vary...

I've seen lower power springs (and maybe these were for 12 ga only for shooting lighter loads) but never seen an extra power. I'd source 2-3 factory springs and see if one was a bit a stronger than the others (Midwest Gun Works sometimes has them in stock). The nature of spring making is going to ha...