Benelli M2 Drilled & Tapped?
- Hunt4spurs87
- Posts: 135
- Joined: May 22nd, 2018, 1:23 pm
Benelli M2 Drilled & Tapped?
Just purchased a brand new M2 and curious as to what I can expect to pay to have it drilled and tapped for a red dot?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Posts: 175
- Joined: February 14th, 2017, 9:28 pm
Re: Benelli M2 Drilled & Tapped?
About $20/hole. Go with a 336 style mount (only 2 holes) for $40-ish.
- Hunt4spurs87
- Posts: 135
- Joined: May 22nd, 2018, 1:23 pm
Re: Benelli M2 Drilled & Tapped?
Thank you for the reply
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Benelli M2 Drilled & Tapped?
Stay as far back on the reciever as you can when you drill & tap it ! The metal is thicker there . Only 2 holes !
- Hunt4spurs87
- Posts: 135
- Joined: May 22nd, 2018, 1:23 pm
Re: Benelli M2 Drilled & Tapped?
Rob Roberts quoted me 40 a hole but will give Military discount maybe that’s worth it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Posts: 175
- Joined: February 14th, 2017, 9:28 pm
Re: Benelli M2 Drilled & Tapped?
Unless y’all are neighbors, you’ll have to incur shipping costs. Any halfway reputable gunsmith can do it well and in minutes. Likely well under $40/hole.
- Hunt4spurs87
- Posts: 135
- Joined: May 22nd, 2018, 1:23 pm
Re: Benelli M2 Drilled & Tapped?
I’m stationed at Ft Bragg NC if anyone can suggest a reputable gun smith
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Hoobilly
- Gobbler Nation
- Posts: 13400
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: Benelli M2 Drilled & Tapped?
The 336 mount is good. I think the Sumtoy Base is good as well. 50 for the base, and William will drill and tap. Not sure what shipping would be. Should t be more than 15-25 for shipping
- Hunt4spurs87
- Posts: 135
- Joined: May 22nd, 2018, 1:23 pm
Re: Benelli M2 Drilled & Tapped?
Do you have his contact info?hoobilly wrote:The 336 mount is good. I think the Sumtoy Base is good as well. 50 for the base, and William will drill and tap. Not sure what shipping would be. Should t be more than 15-25 for shipping
Sent from my iPhone using Tapatalk
- Hoobilly
- Gobbler Nation
- Posts: 13400
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: Benelli M2 Drilled & Tapped?
SumToy CustomsHunt4spurs87 wrote: ↑June 1st, 2018, 11:08 amDo you have his contact info?hoobilly wrote:The 336 mount is good. I think the Sumtoy Base is good as well. 50 for the base, and William will drill and tap. Not sure what shipping would be. Should t be more than 15-25 for shipping
Sent from my iPhone using Tapatalk
23 Dogwood Extension
Jesup, GA 31545
Phone: (912) 237-4360
email is william@sumtoycustoms.com
tell him Hoobilly sent you
- Stinky J Picklestein
- Gobbler Nation
- Posts: 1731
- Joined: July 29th, 2011, 1:12 pm
Re: Benelli M2 Drilled & Tapped?
A local gunsmith quoted me $20 per hole, but ended up only charging me $25 for the both.
- youngoutdoors
- Posts: 179
- Joined: April 24th, 2017, 10:13 pm
- Location: Mountains of NW NC
Re: Benelli M2 Drilled & Tapped?
I'd have more than 2 holes. If one screw gets a little loose then you will have troubles. Drilled and tapped my own Benelli with two holes the first time. It has four holes now and I was in the thicker rear portion. If you were closer I do it for you.
God Bless, Louis
Thanks for your service!
God Bless, Louis
Thanks for your service!
Re: Benelli M2 Drilled & Tapped?
drill it at the back. put 6-48 screw that way if you ever have a problem you can go to 8-40.