Benelli M2 choke recommendations?
-
- Posts: 74
- Joined: April 7th, 2016, 1:48 pm
Benelli M2 choke recommendations?
I am building a M2 and am planning on running Hal's 2 oz 2.75 load. 21 inch barrel. I have a .665 IC coming for it. Are there any other chokes I should try if the IC does not work?
Thanks
Nash
Sent from my iPad using Tapatalk
Thanks
Nash
Sent from my iPad using Tapatalk
- Turkinator
- Gobbler Nation
- Posts: 2988
- Joined: May 13th, 2013, 6:25 pm
- Location: southern onio
Re: Benelli M2 choke recommendations?
My SBE with the 665 Indian creek. Shooting 2oz 8s. Is running around 340 in the 10
-
- Posts: 70
- Joined: May 13th, 2015, 9:10 pm
- Location: Gallatin Gateway, Montana
Re: Benelli M2 choke recommendations?
I have that exact same gun and have a Carlson Longbeard .665 that shoots very nice patterns with that load. It will usually put 290 to 300 in the 10 inch and about the same number in the 10 to 20. My gun shoots a nice even well formed pattern.
-
- Posts: 223
- Joined: March 6th, 2015, 11:17 pm
- Location: Beech Bluff, TN
Re: Benelli M2 choke recommendations?
IC .665 in my SBE2 puts 465 in the 10"
-
- Posts: 34
- Joined: January 2nd, 2016, 4:05 pm
- Location: Rolla, MO
Re: Benelli M2 choke recommendations?
What load?
I am running same equipment and not putting up those numbers.
-
- Posts: 223
- Joined: March 6th, 2015, 11:17 pm
- Location: Beech Bluff, TN
Re: Benelli M2 choke recommendations?
Shooters Blue ThunderGunslinger1 wrote: ↑April 16th, 2018, 7:15 amWhat load?
I am running same equipment and not putting up those numbers.
- Hoobilly
- Gobbler Nation
- Posts: 13335
- Joined: August 15th, 2011, 10:15 pm
- Location: Argos Indiana
- Contact:
Re: Benelli M2 choke recommendations?
And his Tennessee Twister is doing 420 in a 2 3/4” load.taylorjones20 wrote: ↑April 16th, 2018, 9:29 amShooters Blue ThunderGunslinger1 wrote: ↑April 16th, 2018, 7:15 amWhat load?
I am running same equipment and not putting up those numbers.
Light recoil to boot
- alabamabowman
- Posts: 122
- Joined: February 24th, 2013, 10:57 am
Re: Benelli M2 choke recommendations?
I shoot the factory full in my sbe2. Right at 300 in the 10 and over 250 in the 20. I would start there.
Sent from my Pixel 2 using Tapatalk
Sent from my Pixel 2 using Tapatalk
Re: Benelli M2 choke recommendations?
You folding or rolling those Blue shells?taylorjones20 wrote: ↑April 16th, 2018, 9:29 amShooters Blue ThunderGunslinger1 wrote: ↑April 16th, 2018, 7:15 amWhat load?
I am running same equipment and not putting up those numbers.
Momma did you hear that gooserbat?
-
- Posts: 223
- Joined: March 6th, 2015, 11:17 pm
- Location: Beech Bluff, TN
Re: Benelli M2 choke recommendations?
I have a M2 with a 21 inch barrel . The IC 665 works really good with several loads . I haven’t found anything better . I did pick up a Jebs 660 . When the weather gets better I will compare the 2 . I may be picky but my only complain about the IC is the extended portion is rough and picks up dirt and debris . I wouldn’t go crazy buying a bunch of tubes . The IC is pretty darn good .
-
- Posts: 7
- Joined: January 27th, 2020, 7:59 am
Re: Benelli M2 choke recommendations?
Im shooting a Franchi Affinity 3 with a Jebs 660 and printing around the 540`s with Nitro 2 5/16 8x9 blend.