Maxus shooters

[hmrx]

Had this maxus for years without trouble. Thoroughly cleaned all parts and back together. Ive had it apart many times. Back from western turkey swing. It went click with a shallow dent on primer 2 out of 4 times. Never happened before. Bolt was fully closed, hard. After ejecting and putting the shell in second time it fired. Same new fiocchi cases from the same bag I used for years. Any thoughts on the culprit. I'll take it apart and look.

Sent from my SM-G950U using Tapatalk

[BrowningGuy88]

Interesting

Mine hasn’t bobbled a lick in two years.

[Hoobilly]

have you taken the bolt apart and cleaned and lightly oiled it??

[hmrx]

I will. Wondered if anyone had issue with a hammer spring. Probably sticky firing pin. Needs more oil.

Sent from my SM-G950U using Tapatalk

[bushangler]

I will. Wondered if anyone had issue with a hammer spring. Probably sticky firing pin. Needs more oil.

Sent from my SM-G950U using Tapatalk

If it’s a sticky firing pin it probably needs to be cleaned and needs less oil.


Sent from my iPhone using Tapatalk

[hmrx]

Thinking hammer spring might be an issue. Riding on away across south Dakota toward home checked midwestgunworks and maxus hammer spring was sold out. Makes you wonder. I'll call browning later about the issue.

Sent from my SM-G950U using Tapatalk

[hmrx]

Called browning they won't admit problem but they're sending a whole trigger assembly free of charge. Great service.

Sent from my SM-G950U using Tapatalk

[Hognutz]

Can’t beat that with a stick! Customer Service like that makes you want to stay with the brand!
Good for you!

[maddog3355]

Browning is a solid company. They will take care of it.

[Hognutz]

I bought a 20ga. Browning Citori 6 months or so ago. They offered a $100 rebate. I filled out the form online and I had a check within 1 week. Surprised the heck out of me! I don’t have much Browning gear..