Browning gold or maxus

A discussion about Turkey guns, rifles, black powder, handguns, chokes, cleaning, and accessories.
Post Reply
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Browning gold or maxus

Post by hmrx »

Anyone know of a place to get a pistol grip stock. Even someone who would custom make. Seems like not much for browning stocks.

Sent from my SM-G950U using Tapatalk

BrowningGuy88
Posts: 750
Joined: February 13th, 2013, 9:01 am

Re: Browning gold or maxus

Post by BrowningGuy88 »

Not that I’ve seen.

I shoot the Maxus and just use the regular stock.

Not a lot of aftermarket support on Browning.


Sent from my iPhone using Tapatalk
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13335
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Browning gold or maxus

Post by Hoobilly »

Browning needs to make a pistol grip stock version

Sister company Winchester did

They would easily compete against Benelli
Don't start none, won't be none!

https://foxtrotammo.com/
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Re: Browning gold or maxus

Post by hmrx »

Sure seems if you don't own a mossberg or Remington, maybe a benelli, your out of luck for many after market parts of any kind except chokes.

Sent from my SM-G950U using Tapatalk

User avatar
Sloppy_Snood
Posts: 554
Joined: September 26th, 2011, 8:52 pm
Location: Midwest
Contact:

Re: Browning gold or maxus

Post by Sloppy_Snood »

If I was a betting man, I would think that the Fabrique Nationale (FN) SLP shotgun's pistol grip stock fits the Winchester SX2/SX3 and possibly the Browning Gold and Silver shotguns (12 gauge). No guarantees but might be worth a "$155 Attempt."

LINK: https://fnestore.com/slp-tactical-butts ... essory-kit

Post up if it works out for you please.
.
"You've gotta be original, because if you're like someone else, what do they need you for?"- Bernadette Peters
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13335
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Browning gold or maxus

Post by Hoobilly »

Sloppy_Snood wrote: April 11th, 2019, 11:00 am If I was a betting man, I would think that the Fabrique Nationale (FN) SLP shotgun's pistol grip stock fits the Winchester SX2/SX3 and possibly the Browning Gold and Silver shotguns (12 gauge). No guarantees but might be worth a "$155 Attempt."

LINK: https://fnestore.com/slp-tactical-butts ... essory-kit

Post up if it works out for you please.
:thumbup:

that would be very cool
Don't start none, won't be none!

https://foxtrotammo.com/
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Re: Browning gold or maxus

Post by hmrx »

Compared the gold and maxus, as I have both. The gold does fit an sx3 and is the same as the slp. Should fit a gold with little trouble. On the maxus the trigger unit has a wider rear locator behind the trigger gaurd and the reciever end is slightly curved. The gold is straight. All other measurements seem close. I'm going to try to refit one. Have to get one ordered. I'll let you know if it'll work.

Sent from my SM-G950U using Tapatalk

User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13335
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Browning gold or maxus

Post by Hoobilly »

hmrx wrote: April 11th, 2019, 9:50 pm Compared the gold and maxus, as I have both. The gold does fit an sx3 and is the same as the slp. Should fit a gold with little trouble. On the maxus the trigger unit has a wider rear locator behind the trigger gaurd and the reciever end is slightly curved. The gold is straight. All other measurements seem close. I'm going to try to refit one. Have to get one ordered. I'll let you know if it'll work.

Sent from my SM-G950U using Tapatalk
be sure to post pictures!
Don't start none, won't be none!

https://foxtrotammo.com/
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Re: Browning gold or maxus

Post by hmrx »

The FN tactical stock was high quality. 3 butt plates and 3 comb inserts with screws. It would fit the gold or sx without much work. The maxus has a wider trigger tang and a curved face. The stock is set for the flat gold receiver. It took about me about 2 hours to adjust the stock for the curve and wider trigger assembly plus you have to inlet a little for the tube. Its slitely larger diameter. Used a dremel and file. Fairly easy just take you time. The stock bolt fit fine also. Worked great. Not the best camo job but, by the time a gobbler notices it won't matter for him. Thanks for the help.Image

Sent from my SM-G950U using Tapatalk

-DIRTNAP-
Posts: 307
Joined: April 12th, 2016, 5:40 pm

Re: Browning gold or maxus

Post by -DIRTNAP- »

How are you liking the new stock
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Re: Browning gold or maxus

Post by hmrx »

Happy so far, much easier on my old wrist. Biggest plus is the extra drop at heel. Puts your eyes in line with the red dot much faster.

Sent from my SM-G950U using Tapatalk

-DIRTNAP-
Posts: 307
Joined: April 12th, 2016, 5:40 pm

Re: Browning gold or maxus

Post by -DIRTNAP- »

Is the lop the same as the factory or longer
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Re: Browning gold or maxus

Post by hmrx »

Adjustable. It has 3 different butt plates one each way of standard. Also 3 comb inserts. The one in the photo is the high one. The butt plate in the photo is the short one.

Sent from my SM-G950U using Tapatalk

-DIRTNAP-
Posts: 307
Joined: April 12th, 2016, 5:40 pm

Re: Browning gold or maxus

Post by -DIRTNAP- »

the length of pull on the factory stock was always a little long for me do you think the shortest setting would be shorter then the factory stock. (think the factory lop is 14 1/4?)
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13335
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: Browning gold or maxus

Post by Hoobilly »

Stock looks factory
Good job on the retrofit
Don't start none, won't be none!

https://foxtrotammo.com/
hmrx
Posts: 12
Joined: June 10th, 2013, 5:39 pm

Re: Browning gold or maxus

Post by hmrx »

I always cut off a 1/2 to 3/4 on a shotgun. The shorter butt plate was in 13 1/2 range. Fit was perfect for me.

Sent from my SM-G950U using Tapatalk

Post Reply

Return to “Gun Talk”