Beard Preservative

General discussion on getting your trophy preserved & for Taxidermist to show their work
Post Reply
User avatar
Phil_W
Posts: 4
Joined: February 23rd, 2016, 1:49 am
Location: South Carolina

Beard Preservative

Post by Phil_W »

Years ago a taxidermist here in town gave me some dry preservative to rub on the meat end of turkey beards. Well last year I finally use the last little bit I had and the guy is out of business. Anyone have suggestions on where I could get some more of this or another alternative?
User avatar
appalachianassassin
Gobbler Nation
Gobbler Nation
Posts: 1216
Joined: February 24th, 2014, 1:11 pm
Location: East Tennessee

Re: Beard Preservative

Post by appalachianassassin »

I would think borax would be good. if you cut it off with very little meat you shouldn't need anything. I leave em on the carcass. :lol:
El Sicario
User avatar
guesswho
Gobbler Nation
Gobbler Nation
Posts: 5426
Joined: July 11th, 2011, 7:50 pm
Location: Bumpass VA, moving to Fuget KY

Re: Beard Preservative

Post by guesswho »

20 Muleteam Borax is all you need. Pick it up at almost Wal-Mart, Publix etc.
Double Naught Spy!
RCD's Owner----------------Badonka Deke Prostaff
MoHo's Prostaff-------------Lighter Than HTL Shooter
The Storm Whistle Prostaff
Official Member Of The Unofficial Firedup Turkey Calls Prostaff
User avatar
redarrow
Gobbler Nation
Gobbler Nation
Posts: 5856
Joined: October 2nd, 2011, 9:26 am
Location: S E Michigan

Re: Beard Preservative

Post by redarrow »

X3 on the borax.
Put you plans in the nail scarred hands.
User avatar
Grumpy
Gobbler Nation
Gobbler Nation
Posts: 4858
Joined: January 22nd, 2012, 12:03 pm
Location: N.C. Montana

Re: Beard Preservative

Post by Grumpy »

I put a little Borax on the skin end and let it dry good for a few days.
I was not his father but he was my son,,MAK IV, 10-15-1993 - 4-22-2007
"Rest in Peace my Little Buddy"
taylorjones20
Posts: 223
Joined: March 6th, 2015, 11:17 pm
Location: Beech Bluff, TN

Re: Beard Preservative

Post by taylorjones20 »

Are you cutting the beards off? I always twist it off at the base and there's no meat left on it...
turkey_slayer
Posts: 659
Joined: February 14th, 2013, 10:06 am

Beard Preservative

Post by turkey_slayer »

guesswho wrote:20 Muleteam Borax is all you need. Pick it up at almost Wal-Mart, Publix etc.
What I use. I pull the beard off instead of cut. Leaves less meat.

Sent from my SM-N900V using Tapatalk
TRKYHTR
Posts: 840
Joined: August 15th, 2011, 10:34 am

Re: Beard Preservative

Post by TRKYHTR »

Even if you pull the beard off there is skin that holds the beard particles together. The bugs will eat that skin and all you will have is a bunch of turkey hairs. Dry the end of the beard with borax and once it's dry cover it with hotglue or wax. I hotglue my beards into a shotgun brass with the primer popped out and a piece of leather sticking out of the hole to hang the beard up.

Joe
Eph 2:8-9
Image
User avatar
GobbleNut
Posts: 926
Joined: July 15th, 2011, 8:58 am

Re: Beard Preservative

Post by GobbleNut »

TRKYHTR wrote:Even if you pull the beard off there is skin that holds the beard particles together. The bugs will eat that skin and all you will have is a bunch of turkey hairs. Dry the end of the beard with borax and once it's dry cover it with hotglue or wax. I hotglue my beards into a shotgun brass with the primer popped out and a piece of leather sticking out of the hole to hang the beard up.

Joe
I agree,....Joe's point about going beyond just the borax stage is important. Over time, the beard sheath will begin to deteriorate, or get bugs/bacteria and start to fall apart. Another quick and simple way to inhibit that process is to use superglue and apply it to the base of the beard hairs where they meet the beard sheath, making sure to saturate the beard so that all of the hairs are bonded together with the sheath.

If you have a beard that has decomposed to the point that many or all of the hairs have come loose, you can fix that, too, by taking all of the hairs, putting a rubber band around the base, and then super-gluing the base of the hair cluster. As an added bonus to this, if you do it right, you can add a couple of inches to the length of the beard,....kind of like Viagra! :D :LMAO: :toothy7:
User avatar
redarrow
Gobbler Nation
Gobbler Nation
Posts: 5856
Joined: October 2nd, 2011, 9:26 am
Location: S E Michigan

Re: Beard Preservative

Post by redarrow »

GobbleNut wrote:
TRKYHTR wrote:Even if you pull the beard off there is skin that holds the beard particles together. The bugs will eat that skin and all you will have is a bunch of turkey hairs. Dry the end of the beard with borax and once it's dry cover it with hotglue or wax. I hotglue my beards into a shotgun brass with the primer popped out and a piece of leather sticking out of the hole to hang the beard up.

Joe
I agree,....Joe's point about going beyond just the borax stage is important. Over time, the beard sheath will begin to deteriorate, or get bugs/bacteria and start to fall apart. Another quick and simple way to inhibit that process is to use superglue and apply it to the base of the beard hairs where they meet the beard sheath, making sure to saturate the beard so that all of the hairs are bonded together with the sheath.

If you have a beard that has decomposed to the point that many or all of the hairs have come loose, you can fix that, too, by taking all of the hairs, putting a rubber band around the base, and then super-gluing the base of the hair cluster. As an added bonus to this, if you do it right, you can add a couple of inches to the length of the beard,....kind of like Viagra! :D :LMAO: :toothy7:
With Viagara for the beard we can all look like ZZ Topp. :toothy7:
Put you plans in the nail scarred hands.
KPcalls
Posts: 788
Joined: January 21st, 2014, 10:22 am
Location: Livingston La,

Re: Beard Preservative

Post by KPcalls »

I've used Borax on my beards for years, but after bugs got into them this summer I painted them with black liquid electrical tape after killing the bugs. I will use this method from now on. Hot glue would also do the job.
User avatar
OLE RASPY
Gobbler Nation
Gobbler Nation
Posts: 2958
Joined: July 8th, 2011, 10:06 pm
Location: KENTUCKY

Re: Beard Preservative

Post by OLE RASPY »

TRKYHTR wrote:Even if you pull the beard off there is skin that holds the beard particles together. The bugs will eat that skin and all you will have is a bunch of turkey hairs. Dry the end of the beard with borax and once it's dry cover it with hotglue or wax. I hotglue my beards into a shotgun brass with the primer popped out and a piece of leather sticking out of the hole to hang the beard up.

Joe
x2 that's way I do it
TURKEYS
COYOTES
DEER
SQUIRRELS
(all in this order)
drenalinld
Gobbler Nation
Gobbler Nation
Posts: 1330
Joined: December 10th, 2011, 8:37 pm

Beard Preservative

Post by drenalinld »

Also, mice will eat this skin if given the opportunity.
User avatar
ncturkey
Posts: 886
Joined: September 15th, 2011, 2:22 pm
Location: North Carolina

Re: Beard Preservative

Post by ncturkey »

Great tips. The thing that will make them last longer after borax and the hot glue or epoxy is I store my beards in a Tupperware container. I keep them in doors away from the bug and mice.
Mike
User avatar
poorcountrypreacher
Posts: 677
Joined: July 10th, 2012, 1:39 pm

Re: Beard Preservative

Post by poorcountrypreacher »

I just finished fixing mine up from this past season. I pull the brass part of a 12 gauge shell and knock out the primer. I cut the spurs out and soak them in varnish, then run a strip of leather thru the hollow of the leg and run both ends into the primer hole. Then I hot glue the beard into the hull brass, put a tag on it with the stats of the turkey, and hang them all on a rope in my office.

I've got every turkey I've killed the past 18 years; all the beards from before then are ruined.
decoykrvr
Posts: 853
Joined: February 10th, 2015, 1:28 pm

Re: Beard Preservative

Post by decoykrvr »

The commercial preparation Bess Made is the best preservative I've ever used. To keep the bugs away, you need to spray the beards w/ a water based permethrin solution. I've got a room full of waterfowl and turkey mounts which I brush off w/ a wide soft bristle drafters brush as needed to remove dust and spray @ once a year to keep the beetles off.
User avatar
Stinky J Picklestein
Gobbler Nation
Gobbler Nation
Posts: 1731
Joined: July 29th, 2011, 1:12 pm

Re: Beard Preservative

Post by Stinky J Picklestein »

I submerge my beard bases in borax and leave them that way for 6+ months, even up to a year. So far, that's all they've needed.
J-Shaped
Posts: 12
Joined: January 17th, 2017, 9:40 am

Re: Beard Preservative

Post by J-Shaped »

I have done the shot shell brass and hot glue combo others have mentioned for many years. I throw all of my beards and feet in the freezer as soon as the bird is cleaned, then deal with them all after season. I soak all of my beards in warm water and dish soap to clean them thoroughly of any dried blood or whatever else. Then I trim the skin as much as possible before putting the ends in borax for a couple of weeks. Once cured, then I hot glue them into the brass.

This year I pulled all of my beards from displays and treated them with this commercial product based off several reviews I read.

http://www.mountmedix.com/index.php?mai ... ducts_id=6

I figured I've put too much into collecting them over the years to chance bugs getting at them, and the process was easy enough.
User avatar
BeardBuster
Posts: 165
Joined: January 3rd, 2016, 10:19 pm

Re: Beard Preservative

Post by BeardBuster »

poorcountrypreacher wrote:I just finished fixing mine up from this past season. I pull the brass part of a 12 gauge shell and knock out the primer. I cut the spurs out and soak them in varnish, then run a strip of leather thru the hollow of the leg and run both ends into the primer hole. Then I hot glue the beard into the hull brass, put a tag on it with the stats of the turkey, and hang them all on a rope in my office.

I've got every turkey I've killed the past 18 years; all the beards from before then are ruined.
Preacher, I like the way it sounds like you have done your beards. Could you post a picture of what this looks like? I've got a giant tupperware container full I need to do something with. Thanks!
User avatar
appalachianassassin
Gobbler Nation
Gobbler Nation
Posts: 1216
Joined: February 24th, 2014, 1:11 pm
Location: East Tennessee

Re: Beard Preservative

Post by appalachianassassin »

everyone I know that keeps beards uses borax only. one guy has beards from the first Tennessee season and has never had a problem with beetles. anything else is extra precaution I guess, but borax is all that is needed.
El Sicario
User avatar
poorcountrypreacher
Posts: 677
Joined: July 10th, 2012, 1:39 pm

Re: Beard Preservative

Post by poorcountrypreacher »

BeardBuster wrote:
poorcountrypreacher wrote:I just finished fixing mine up from this past season. I pull the brass part of a 12 gauge shell and knock out the primer. I cut the spurs out and soak them in varnish, then run a strip of leather thru the hollow of the leg and run both ends into the primer hole. Then I hot glue the beard into the hull brass, put a tag on it with the stats of the turkey, and hang them all on a rope in my office.

I've got every turkey I've killed the past 18 years; all the beards from before then are ruined.
Preacher, I like the way it sounds like you have done your beards. Could you post a picture of what this looks like? I've got a giant tupperware container full I need to do something with. Thanks!
I would be glad to, but all my pics are on PB and it won't let me post them. I haven't had time to set up an account with another site.

Maybe I should use borax on them before gluing them in, but I don't seem to have any problems after 18 years. I do take care to completely fill the hull with glue so that the individual hairs of the beard all are covered in the glue.

If you really need to see a pic, pm me a cell number and I will text a pic or 2.
Post Reply

Return to “Taxidermy”