410 tap

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
SumToy
Posts: 317
Joined: July 2nd, 2012, 8:39 am

410 tap

Post by SumToy »

Ok guys we finely got all the stuff in and figured out what is was. We can thread the 410 barrels and cut the chokes for them threads. All the 410s that we had in are boxed up and on the way back.

The best I can tell on the threads they are the same size as the true choke but they ran 32 tpi and not 44 tpi with the two starting points.
User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 3566
Joined: May 16th, 2012, 11:29 am
Location: Lowcountry, GA

Re: 410 tap

Post by GLS »

Great news, William. William sleeved one Yildiz .410 before he made a screw-in for another gun. The first gun out of the box would only shoot 75 in the 10" ring at 40. This was with TSS 9's. When we first shot the gun at his shop, he had to make three on the spot adjustments to choke geometry and it is now a 131 in the 10" ring at 40. On my gun which out of the box was a 100 in the 10" at 40 I had the barrel cut from 28" to 24" and had Mike Orlen thread the barrel. William's choke raised the density to 159 in the 10" at 40 yards with brass hulls and 130 with plastic. TSS 9.5"s. The Sumtoy .410 choke is a winner. It's good news that all can now be done at one shop. I am not aware of any other specialized turkey choke for .410.
Image
Post Reply

Return to “Small Bore”