cz shotgun

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
bonemonger
Posts: 109
Joined: July 21st, 2012, 8:51 pm

cz shotgun

Post by bonemonger »

Ordered a 20, what thread is the choke tubes.
User avatar
DocHolliday
Posts: 518
Joined: April 18th, 2012, 1:46 pm
Location: Louisiana

Re: cz shotgun

Post by DocHolliday »

Huglu. The CZ (doubles anyway) are made by Huglu in Turkey and they use a proprietary thread. Tubes can be obtained from Trulock or Briley.
NRA Benefactor Life Member
BrowningGuy88
Posts: 750
Joined: February 13th, 2013, 9:01 am

Post by BrowningGuy88 »

Carlson also makes the chokes for the 20 gauge.
bonemonger
Posts: 109
Joined: July 21st, 2012, 8:51 pm

Re: cz shotgun

Post by bonemonger »

Thanks for the information,I'm looking to shoot hevi-13 #7 shot in the bottom barrel and hevi-weight #7 in the top barrel. Any choke maker and constriction information would be appreciated. Thanks bob
User avatar
DocHolliday
Posts: 518
Joined: April 18th, 2012, 1:46 pm
Location: Louisiana

Re: cz shotgun

Post by DocHolliday »

I'm running Trulocks in all of ours. Unfortunately guns are like individuals. My 2 kids shoot CZ Bobwhites (SXS). Son's likes .585 for Hevi 7's at 40 and Daughters likes .571 (same load,same distance). All my others I'm running .575 (custom). Trulocks are the best I've found.
NRA Benefactor Life Member
bonemonger
Posts: 109
Joined: July 21st, 2012, 8:51 pm

Re: cz shotgun

Post by bonemonger »

Thanks doc, I will call tru-lock tomorrow and order them. Bought the cz mallard.
User avatar
DocHolliday
Posts: 518
Joined: April 18th, 2012, 1:46 pm
Location: Louisiana

Re: cz shotgun

Post by DocHolliday »

My Dad uses the Mallard. Interesting gun. Only problem I had setting it up was if I got the top barrel on at 40, the bottom barrel was low (think low body shot) at 20. Easily corrected if you can remember to shoot st his HEAD at 20 and NOT his wattles. That's harder than it sounds.
NRA Benefactor Life Member
bonemonger
Posts: 109
Joined: July 21st, 2012, 8:51 pm

Re: cz shotgun

Post by bonemonger »

Got my gun in,read the manual and I'm assuming that the full choke only has one slash. Never had choke tubes marked that way.
BrowningGuy88
Posts: 750
Joined: February 13th, 2013, 9:01 am

Post by BrowningGuy88 »

That is correct bonemonger.
bonemonger
Posts: 109
Joined: July 21st, 2012, 8:51 pm

Re: cz shotgun

Post by bonemonger »

Got my tru-lock chokes today. Shot the gun at 30 and 40 yards. Tight at 30 and decent at 40. Trigger pull is a little rough but overall I'm satisfied. Thanks for all your help. Bob
bonemonger
Posts: 109
Joined: July 21st, 2012, 8:51 pm

Re: cz shotgun

Post by bonemonger »

Not real happy with the triggers on my gun, looking for someone to lighten up the pull. Any recommendations for a gunsmith?
BrowningGuy88
Posts: 750
Joined: February 13th, 2013, 9:01 am

Post by BrowningGuy88 »

I sent mine back to CZ and they came back at 4.5 lbs each.

Mark Dehaan is the man on CZ triggers (well all their internals) but I don't know what he charges.
Post Reply

Return to “Small Bore”