What choke for tss in benelli sbe
What choke for tss in benelli sbe
I have an older sbe that I never really turkey hunted with because I could not ever get it to pattern well. I found a mec loader in my dads attic last weekend so I loaded some 12 gauge tss for it. 2 oz's of 8 or 9 shot.
What choke do you reccomend? I have a ported rhino 665 in it now but based on experiences with my other guns this is too tight for the tss.
Thanks for your help.
What choke do you reccomend? I have a ported rhino 665 in it now but based on experiences with my other guns this is too tight for the tss.
Thanks for your help.
Re: What choke for tss in benelli sbe
May want to give that .665 a try. It will be tight, but you may like it.
- hookedspur
- Gobbler Nation
- Posts: 2370
- Joined: May 24th, 2012, 8:44 pm
- Location: Ohio
Re: What choke for tss in benelli sbe
IC 665 in mine and I like it . It is tight but I have a FF lll and it works out real nice.
What choke for tss in benelli sbe
I'm using a PG 670. But I would buy a xtra full trulock or carlsons. They are alot cheaper. You don't need expensive chokes for TSS from what I have read on here.
Re: What choke for tss in benelli sbe
I have an IC .665 and have never tried
It with my TSS.
What are the 10"/20" numbers u are getting
With a 2oz load of TSS 9's?
It with my TSS.
What are the 10"/20" numbers u are getting
With a 2oz load of TSS 9's?
- tubecaller10
- Posts: 296
- Joined: August 6th, 2012, 5:08 pm
- Location: Mississippi
Re: What choke for tss in benelli sbe
The rhino 665 will be good. I have I rhino 670 and it throws good tight patterns. Also can shoot hevi shot/nitros and never have to Change chokes.
- 01Foreman400
- Posts: 431
- Joined: March 4th, 2013, 3:33 pm
Re: What choke for tss in benelli sbe
What kind of patterns are you getting with your .670 with the 2 oz. TSS load?tubecaller10 wrote:The rhino 665 will be good. I have I rhino 670 and it throws good tight patterns. Also can shoot hevi shot/nitros and never have to Change chokes.
Re: What choke for tss in benelli sbe
I am wanting a more even pattern. I am worried the 665 will be too tight based on my work with my 20 gauge guns. My 20 gauge setup for hevi/nitros is was too tight for the tss.
- poorcountrypreacher
- Posts: 678
- Joined: July 10th, 2012, 1:39 pm
Re: What choke for tss in benelli sbe
I've used a PG .670 for the last 6 years. It usually puts about 240 into the 10" ring at 40 using #8 tss. I wouldn't want it any tighter.
Re: What choke for tss in benelli sbe
I just found a rhino 673 I forgot I had. I will give it a try
- Shooter
- Gobbler Nation
- Posts: 5488
- Joined: April 19th, 2012, 1:29 pm
- Location: Deep South, Middle, TN
Re: What choke for tss in benelli sbe
My Buddy has one of the older SBEs, and his shoots TSS 2oz or 2 1/2oz best with the factory full, which is .685 or .690
- tubecaller10
- Posts: 296
- Joined: August 6th, 2012, 5:08 pm
- Location: Mississippi
Re: What choke for tss in benelli sbe
I haven't shot it with the 2 oz load but have shot it with 2 1/4 oz 9s. I will have to go back and find my pattern board in my reloading room but I'm pretty sure i hit 400+ in a 10" circle.01Foreman400 wrote:What kind of patterns are you getting with your .670 with the 2 oz. TSS load?tubecaller10 wrote:The rhino 665 will be good. I have I rhino 670 and it throws good tight patterns. Also can shoot hevi shot/nitros and never have to Change chokes.
Re: What choke for tss in benelli sbe
So I tried out my IC .665 in my SBE2
70*. Slight breeze 10mph. Humidity 100%
Hals Federal 3" 2oz #9's
10"---395!!!
20"---220!!!
Hals Fiocchi 3" 2oz 9's
10"---295
20"---300
So why such a big difference?
Needless to say I like the IC .665 Ported
With the TSS!!!!
70*. Slight breeze 10mph. Humidity 100%
Hals Federal 3" 2oz #9's
10"---395!!!
20"---220!!!
Hals Fiocchi 3" 2oz 9's
10"---295
20"---300
So why such a big difference?
Needless to say I like the IC .665 Ported
With the TSS!!!!
What choke for tss in benelli sbe
The difference between hulls is interesting. I ordered a Carlson Extended Turkey Choke in 675 to try in my SBE 1. I'll post up the results.
Re: What choke for tss in benelli sbe
How many shots each. You will get swings some times. Both are damn good.K9Doc wrote:So I tried out my IC .665 in my SBE2
70*. Slight breeze 10mph. Humidity 100%
Hals Federal 3" 2oz #9's
10"---395!!!
20"---220!!!
Hals Fiocchi 3" 2oz 9's
10"---295
20"---300
So why such a big difference?
Needless to say I like the IC .665 Ported
With the TSS!!!!
Re: What choke for tss in benelli sbe
Only 1 shot each JD.
Re: What choke for tss in benelli sbe
I wish I could get my sbe to pattern. Won't shoot any loads worth a damn.
Re: What choke for tss in benelli sbe
I'm more of a 20" guy than a 10" guy. When we are shooting cores that are so dense, it doesn't take much to swing right many pellets to one side of the 10" line or the other. 595 vs 615 isn't a very big difference in the 20".K9Doc wrote:So I tried out my IC .665 in my SBE2
70*. Slight breeze 10mph. Humidity 100%
Hals Federal 3" 2oz #9's
10"---395!!!
20"---220!!!
Hals Fiocchi 3" 2oz 9's
10"---295
20"---300
So why such a big difference?
Needless to say I like the IC .665 Ported
With the TSS!!!!