Starting point for 1-3/4 oz #9 out of M3500
-
- Posts: 392
- Joined: March 17th, 2014, 2:07 pm
Starting point for 1-3/4 oz #9 out of M3500
Not much talk around here about the Stoegers. Can anyone give me a starting point for 1-3/4 oz TSS #9? I have anywhere from a .640- factory flush mount.
- Shooter
- Gobbler Nation
- Posts: 5488
- Joined: April 19th, 2012, 1:29 pm
- Location: Deep South, Middle, TN
Re: Starting point for 1-3/4 oz #9 out of M3500
Well heck, I guess I'm the Stoeger guy on here. I normally run 2oz though a .675 out of a 3". Shoots more than tight enough.
Usually shoot 2 and a half oz with the 3.5" through a .690. Pattern is downright Nasty!
A .640 would be way, way too tight for TSS. Heck, it was too tight for my lead loads too!
Usually shoot 2 and a half oz with the 3.5" through a .690. Pattern is downright Nasty!
A .640 would be way, way too tight for TSS. Heck, it was too tight for my lead loads too!
Starting point for 1-3/4 oz #9 out of M3500
I have a buddy shooting a .670 and has a real tight pattern with a two ouncer.
-
- Posts: 392
- Joined: March 17th, 2014, 2:07 pm
Re: Starting point for 1-3/4 oz #9 out of M3500
Thanks I'll probably start with factory full and see what it will do. Yeah I figured my .640, .650, and .656 would be too tight but you never know.
-
- Posts: 392
- Joined: March 17th, 2014, 2:07 pm
Re: Starting point for 1-3/4 oz #9 out of M3500
I just ran the factory full .695 in it.
274/267 with 1-3/4 oz of TSS #9.
274/267 with 1-3/4 oz of TSS #9.
- GOLD HUNTER
- Gobbler Nation
- Posts: 4595
- Joined: September 1st, 2011, 10:07 pm
- Location: BIG LICK VA.
Re: Starting point for 1-3/4 oz #9 out of M3500
LET'S GO TROUT FISHING
Re: Starting point for 1-3/4 oz #9 out of M3500
Those numbers are ideal. No need for the high dollar chokes.GALongbeardSmacker wrote:I just ran the factory full .695 in it.
274/267 with 1-3/4 oz of TSS #9.
-
- Posts: 392
- Joined: March 17th, 2014, 2:07 pm
Re: Starting point for 1-3/4 oz #9 out of M3500
Thinking about seeing what the 2 oz load can do with a little more open choke. I want to see a good spread at 25 yds.
Re: Starting point for 1-3/4 oz #9 out of M3500
Ain't gonna matter. Not gonna matter what more open choke you use. TSS is already a more open patterning shot up close. What you have is a super pattern. Let it ride.
Re: Starting point for 1-3/4 oz #9 out of M3500
Although the more of those you shoot the more money for Hal he might like it a lot
- Spuriosity
- Gobbler Nation
- Posts: 2766
- Joined: April 23rd, 2012, 10:12 pm
- Location: Western North Carolina
Re: Starting point for 1-3/4 oz #9 out of M3500
Everybody loves to tinker, including myself. But I would not change a thing.
Re: Starting point for 1-3/4 oz #9 out of M3500
Sounds like you have perfect hunting pattern! Resist the urge to tinker. I wish I could.
-
- Posts: 392
- Joined: March 17th, 2014, 2:07 pm
Re: Starting point for 1-3/4 oz #9 out of M3500
Thanks for the comments. I ordered the stuff I need for a 2 oz load, so I still might load one up just to see what it will do out of a modified or improved cylinder. I wish I would have waited to order it until after shooting... oh well.
Re: Starting point for 1-3/4 oz #9 out of M3500
Go with it......I NEVER tinker