Page 1 of 1
Benelli M2 choke recommendations?
Posted: March 2nd, 2018, 3:51 pm
by golfernash
I am building a M2 and am planning on running Hal's 2 oz 2.75 load. 21 inch barrel. I have a .665 IC coming for it. Are there any other chokes I should try if the IC does not work?
Thanks
Nash
Sent from my iPad using Tapatalk
Re: Benelli M2 choke recommendations?
Posted: March 2nd, 2018, 8:45 pm
by Turkinator
My SBE with the 665 Indian creek. Shooting 2oz 8s. Is running around 340 in the 10
Re: Benelli M2 choke recommendations?
Posted: March 4th, 2018, 9:05 am
by Ozark Ridge Runner
I have that exact same gun and have a Carlson Longbeard .665 that shoots very nice patterns with that load. It will usually put 290 to 300 in the 10 inch and about the same number in the 10 to 20. My gun shoots a nice even well formed pattern.
Re: Benelli M2 choke recommendations?
Posted: March 4th, 2018, 7:49 pm
by taylorjones20
IC .665 in my SBE2 puts 465 in the 10"
Re: Benelli M2 choke recommendations?
Posted: April 16th, 2018, 7:15 am
by Gunslinger1
taylorjones20 wrote: ↑March 4th, 2018, 7:49 pm
IC .665 in my SBE2 puts 465 in the 10"
What load?
I am running same equipment and not putting up those numbers.
Re: Benelli M2 choke recommendations?
Posted: April 16th, 2018, 9:29 am
by taylorjones20
Gunslinger1 wrote: ↑April 16th, 2018, 7:15 am
taylorjones20 wrote: ↑March 4th, 2018, 7:49 pm
IC .665 in my SBE2 puts 465 in the 10"
What load?
I am running same equipment and not putting up those numbers.
Shooters Blue Thunder
Re: Benelli M2 choke recommendations?
Posted: April 16th, 2018, 10:21 am
by Hoobilly
taylorjones20 wrote: ↑April 16th, 2018, 9:29 am
Gunslinger1 wrote: ↑April 16th, 2018, 7:15 am
taylorjones20 wrote: ↑March 4th, 2018, 7:49 pm
IC .665 in my SBE2 puts 465 in the 10"
What load?
I am running same equipment and not putting up those numbers.
Shooters Blue Thunder
And his Tennessee Twister is doing 420 in a 2 3/4” load.
Light recoil to boot
Re: Benelli M2 choke recommendations?
Posted: February 27th, 2019, 7:04 pm
by alabamabowman
I shoot the factory full in my sbe2. Right at 300 in the 10 and over 250 in the 20. I would start there.
Sent from my Pixel 2 using Tapatalk
Re: Benelli M2 choke recommendations?
Posted: April 2nd, 2019, 12:06 am
by Gooserbat
taylorjones20 wrote: ↑April 16th, 2018, 9:29 am
Gunslinger1 wrote: ↑April 16th, 2018, 7:15 am
taylorjones20 wrote: ↑March 4th, 2018, 7:49 pm
IC .665 in my SBE2 puts 465 in the 10"
What load?
I am running same equipment and not putting up those numbers.
Shooters Blue Thunder
You folding or rolling those Blue shells?
Re: Benelli M2 choke recommendations?
Posted: April 2nd, 2019, 9:14 am
by taylorjones20
Rolling
Re: Benelli M2 choke recommendations?
Posted: April 15th, 2019, 4:10 am
by KyKRAZEE
Try the Truglo headbanger .665
Re: Benelli M2 choke recommendations?
Posted: February 25th, 2020, 10:14 pm
by obro
I have a M2 with a 21 inch barrel . The IC 665 works really good with several loads . I haven’t found anything better . I did pick up a Jebs 660 . When the weather gets better I will compare the 2 . I may be picky but my only complain about the IC is the extended portion is rough and picks up dirt and debris . I wouldn’t go crazy buying a bunch of tubes . The IC is pretty darn good .
Re: Benelli M2 choke recommendations?
Posted: February 26th, 2020, 8:19 am
by SweetTalk77
Im shooting a Franchi Affinity 3 with a Jebs 660 and printing around the 540`s with Nitro 2 5/16 8x9 blend.