Flush turkey choke

Talk about 10 12 & 16 gauge shotguns here.
Post Reply
countryboy478
Posts: 3
Joined: April 2nd, 2017, 12:53 am

Flush turkey choke

Post by countryboy478 »

Do you use one and what kind of patterns are you getting?

Sent from my LGL44VL using Tapatalk
User avatar
howl
Gobbler Nation
Gobbler Nation
Posts: 1465
Joined: April 25th, 2013, 10:26 am
Location: Middle GA

Re: Flush turkey choke

Post by howl »

Does the factory full in the bottom barrel of my 20 gauge count? Federal Flite Control loads work well 99% of the time with the factory flush choke. I had good luck with their 3" 2oz #5 shell for several years. Had to shoot twice a couple times due to that wad not being consistent unless you use an appropriate aftermarket choke.
Yerple
Posts: 14
Joined: April 2nd, 2017, 9:55 pm

Re: Flush turkey choke

Post by Yerple »

I have a SBE2 with a 26" barrel. I have a few extended chokes for it but when I started using the Winchester Longbeards I found they shot so tight I went back to the factory full choke. Does an excellent job out to 40 with good density and a nice even pattern.

That's with the 3" mags #5 shot.
Tail Feathers
Posts: 687
Joined: December 2nd, 2014, 9:27 pm
Location: E. Texas

Re: Flush turkey choke

Post by Tail Feathers »

I use a Carlson's flush turkey choke in my 20 gauge SX3. Patterns about 145-150 at 40 yards with HW 7's. With a 26" barrel, I didn't want to add an extended choke if I could avoid it. I'm pleased with it.
Turkey fanatic :turkeywave:
Post Reply

Return to “Big Bore”