Winchester - Xtended Supreme Elite - 12GA-3.5" #6

General, buy, sell, trade, & want to buy items.
Post Reply
Yule
Posts: 118
Joined: March 9th, 2017, 9:41 pm

Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Yule » February 7th, 2019, 11:20 am

Going through my turkey shells and found 2 boxes ( 20 shells ) of Winchester Xtended Supreme Elite ammo. These were my go to shells, before TSS. They are 3.5" - 1225 FPS - 2 oz #6. Will sell for $60.00, shipped.

Dtrkyman
Posts: 100
Joined: April 12th, 2015, 2:06 pm

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by Dtrkyman » February 7th, 2019, 11:40 am

Bump, If I still shot a 12 that would be sweet!

User avatar
SwampDrummin
Posts: 335
Joined: January 5th, 2016, 5:38 pm

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by SwampDrummin » February 7th, 2019, 12:20 pm

I was so mad when they discontinued those.

User avatar
Southern Sportsman
Posts: 951
Joined: February 24th, 2013, 12:32 am
Location: West TN

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by Southern Sportsman » February 7th, 2019, 1:02 pm

SwampDrummin wrote:
February 7th, 2019, 12:20 pm
I was so mad when they discontinued those.
Me too. Then I started loading TSS. IMO, they were the best factory 12 gauge shell made before commercial TSS loads.
I go stubbornly into error by myself, and reach my own fallacious conclusions using my own faulty data. ~Tom Kelly

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1698
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by Turkinator » February 7th, 2019, 1:17 pm

I have a box of them in 3” 6s. I shot them till I went to federal hw 7s.

Hook Daddy
Posts: 10
Joined: May 16th, 2018, 5:23 pm

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by Hook Daddy » February 8th, 2019, 11:21 am

Are these the original Xtended Range, bloack hull w/ silver brass?

Yule
Posts: 118
Joined: March 9th, 2017, 9:41 pm

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by Yule » February 8th, 2019, 12:40 pm

Yes. Top of box says XTENDED RANGE HI DENSITY

KyKRAZEE
Posts: 77
Joined: March 16th, 2016, 4:21 pm

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by KyKRAZEE » February 10th, 2019, 3:09 am

Turkinator wrote:
February 7th, 2019, 1:17 pm
I have a box of them in 3” 6s. I shot them till I went to federal hw 7s.
Did you have much success with the HW 7s? If so what gun/choke worked for you? What were your #s ? Do you still have the Xtended range 6s? If so,would you be interested in selling them?

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1698
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by Turkinator » February 10th, 2019, 8:35 am

KyKRAZEE wrote:
February 10th, 2019, 3:09 am
Turkinator wrote:
February 7th, 2019, 1:17 pm
I have a box of them in 3” 6s. I shot them till I went to federal hw 7s.
Did you have much success with the HW 7s? If so what gun/choke worked for you? What were your #s ? Do you still have the Xtended range 6s? If so,would you be interested in selling them?
I shot the HW7s out of a TC Encore with a Wright’s turkey choke. I can’t remember the choke constriction but I think it was around.655 unported. I killed a bunch of birds with it. It never threw phenomenal numbers, 180ish was about the best I saw, I started loading tss for it. If tss had not came along I would have stayed with the federal HW7s.

KyKRAZEE
Posts: 77
Joined: March 16th, 2016, 4:21 pm

Re: WIN - Xtended Supreme Elite - 12GA-3.5" #6

Post by KyKRAZEE » February 10th, 2019, 12:04 pm

Turkinator wrote:
February 10th, 2019, 8:35 am
KyKRAZEE wrote:
February 10th, 2019, 3:09 am
Turkinator wrote:
February 7th, 2019, 1:17 pm
I have a box of them in 3” 6s. I shot them till I went to federal hw 7s.
Did you have much success with the HW 7s? If so what gun/choke worked for you? What were your #s ? Do you still have the Xtended range 6s? If so,would you be interested in selling them?
I shot the HW7s out of a TC Encore with a Wright’s turkey choke. I can’t remember the choke constriction but I think it was around.655 unported. I killed a bunch of birds with it. It never threw phenomenal numbers, 180ish was about the best I saw, I started loading tss for it. If tss had not came along I would have stayed with the federal HW7s.
I've never known for HW to put up real good #s either,but if I could get 180 I would be very happy. Do you still have the 3" extended range 6s you spoke of? And would you sell them? Thanks for your input!!

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1698
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Turkinator » February 10th, 2019, 1:56 pm

Not really interested in selling them at this time.

KyKRAZEE
Posts: 77
Joined: March 16th, 2016, 4:21 pm

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by KyKRAZEE » February 22nd, 2019, 7:31 am

Turkinator wrote:
February 10th, 2019, 1:56 pm
Not really interested in selling them at this time.
If you ever decide to sell them please let me know!!!
Thanks!! KK

Jakus2
Posts: 2
Joined: February 26th, 2019, 2:35 pm

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Jakus2 » February 26th, 2019, 2:54 pm

Hello, Yule. Do you still have the 2 boxes of 3.5" Xtended Range Hi-Density #6 for sale?

Ultramag
Posts: 8
Joined: February 10th, 2019, 1:22 pm

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Ultramag » February 26th, 2019, 10:02 pm

Jakus2 wrote:
February 26th, 2019, 2:54 pm
Hello, Yule. Do you still have the 2 boxes of 3.5" Xtended Range Hi-Density #6 for sale?
Mack's PW had about 5 or 6 boxes of it still for sale a few days ago.

Yule
Posts: 118
Joined: March 9th, 2017, 9:41 pm

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Yule » February 27th, 2019, 8:36 am

The 3.5" are sold. I do have some of the same loads in 2 3/4" with 1,5 oz of #6.

Jakus2
Posts: 2
Joined: February 26th, 2019, 2:35 pm

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Jakus2 » February 27th, 2019, 3:10 pm

Yule, I would be interested in two boxes of the 2¾" #6 XR H-D and will PM you about them.

Ultramag, appreciate the lead on the 3.5" XR. I checked Mack's website and they must have sold them. Thanks anyway, though.

Ultramag
Posts: 8
Joined: February 10th, 2019, 1:22 pm

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #6

Post by Ultramag » March 1st, 2019, 3:54 pm

Jakus2 wrote:
February 27th, 2019, 3:10 pm
Yule, I would be interested in two boxes of the 2¾" #6 XR H-D and will PM you about them.

Ultramag, appreciate the lead on the 3.5" XR. I checked Mack's website and they must have sold them. Thanks anyway, though.
They still had them yesterday. They are not on the website you will have to call them.

User avatar
ICDEDTURKES
Gobbler Nation
Gobbler Nation
Posts: 7061
Joined: July 8th, 2011, 10:27 am

Re: Winchester - Xtended Supreme Elite - 12GA-3.5" #ok6

Post by ICDEDTURKES » March 2nd, 2019, 7:33 am

Like most shells year one and two are best. Original xt was rated safe in lead only guns. They must of changed something as patterns died and lead. guarantee died

Post Reply

Return to “Gobbler Nation Classifieds”

Who is online

Users browsing this forum: No registered users and 2 guests