Search found 236 matches
- August 5th, 2019, 11:35 am
- Forum: Gobbler Talk
- Topic: Domestic terrorist shootings
- Replies: 20
- Views: 5977
Re: Domestic terrorist shootings
one more thing how did he walk across the parking lot with ear protection and a AK47 with not one seeing him. he did not try to hid the stuff looks like
- June 4th, 2019, 8:51 am
- Forum: Small Bore
- Topic: 3020 BARREL
- Replies: 6
- Views: 2771
Re: 3020 BARREL
IT WILL NEED TO BE TRU CHOKE. MOST ALL THE GUNS NOW DAYS HAVE GONE SMALLER ON OUT SIDE TO CUT WEIGHT ON THEM.
- April 12th, 2019, 8:32 am
- Forum: Small Bore
- Topic: Stoeger M3020
- Replies: 34
- Views: 13588
Re: Stoeger M3020
this will fix you up
- April 12th, 2019, 8:31 am
- Forum: Small Bore
- Topic: Base for Stoeger M3020
- Replies: 2
- Views: 1431
Re: Base for Stoeger M3020
the one you need
- February 22nd, 2019, 9:09 am
- Forum: Small Bore
- Topic: Mossberg 500 .410 patterns
- Replies: 9
- Views: 5288
Re: Mossberg 500 .410 patterns
I have seen them do good but with hand loads.
- January 31st, 2019, 9:10 am
- Forum: Gun Talk
- Topic: Thin wall Tru-Choke and TSS?
- Replies: 7
- Views: 4636
Re: Thin wall Tru-Choke and TSS?
Shoot a few through it, and then see how it screws out. If it got tight, then, no go. I have a 20 with Slim Lines in it. Seems to be fine, and they are the thinnest. What this smart may said. I have found on the thin chokes that if it is going to swell it will do it with lead, htl or tss. It more t...
- January 27th, 2019, 12:23 pm
- Forum: Big Bore
- Topic: Berreta Extrema 2 question
- Replies: 4
- Views: 3064
Re: Berreta Extrema 2 question
660 with 6s 665 with the 4s 5s. 665 to 670 with TSS that is in our choke
- December 26th, 2018, 12:04 pm
- Forum: Gobbler Talk
- Topic: URGENT,PRAYERS FOR ICEDED
- Replies: 57
- Views: 16565
Re: URGENT,PRAYERS FOR ICEDED
Prayers for you and the family
- December 13th, 2018, 7:51 am
- Forum: Gun Talk
- Topic: SUMTOY question
- Replies: 1
- Views: 1654
Re: SUMTOY question
You want the 562 5. We have few different layouts for other shells or to change up patterns to get what some folks are looking for.
- December 10th, 2018, 10:02 am
- Forum: Gun Talk
- Topic: Guard for FF3
- Replies: 9
- Views: 4541
Re: Guard for FF3
SumToy's guards are awesome. No regrets purchases. BTW... whatever happened to Jim Ward and all those Fast Fire guards he was pimping? (If that's on "Sharron's site", I apologize in advance.) He is building them. You can get them from this sight I think. I know few folks been running his ...
- December 6th, 2018, 8:00 am
- Forum: Gun Talk
- Topic: Guard for FF3
- Replies: 9
- Views: 4541
Re: Guard for FF3
We make one and hoobilly has one also.
Ours is one unit. The one hoobilly has will add to the base if you already have base on gun.
Ours is one unit. The one hoobilly has will add to the base if you already have base on gun.
- December 5th, 2018, 9:26 am
- Forum: Small Bore
- Topic: New Stevens 301 Turkey .410
- Replies: 35
- Views: 27430
Re: New Stevens 301 Turkey .410
would like to see a little shorter barrel on it.
- November 12th, 2018, 8:33 am
- Forum: Gun Talk
- Topic: Mossberg 500A 12 Gauge Turkey Chokes
- Replies: 4
- Views: 3089
Re: Mossberg 500A 12 Gauge Turkey Chokes
660 to 665 with the Winchester. 665 to 670 with the TSS. Now the Federal TSS will take little different on last year shells the test are not out on the New one that is coming.
- November 6th, 2018, 8:40 am
- Forum: Small Bore
- Topic: Who Shoots TSS in a BPS 20 Gauge
- Replies: 12
- Views: 6442
Re: Who Shoots TSS in a BPS 20 Gauge
We run 562 in them. I see some with the IC 555 also. I think the 562 is the best good luck
- October 30th, 2018, 9:59 am
- Forum: Gun Talk
- Topic: Red dot removal
- Replies: 13
- Views: 5317
Re: Red dot removal
Is it a O/U you should be able to take it on and off. Now the Single shot it so thin at back I would leave the base on but can take sight of the base.
- October 2nd, 2018, 7:52 am
- Forum: Gobbler Talk
- Topic: Backyard Clay Throwers.
- Replies: 14
- Views: 6425
Re: Backyard Clay Throwers.
all in what you want. I had a 5 stand set up with the champion. They have a remote that works about a 100 yards that will run 2 throwers. Now Walmart has the lower end champion for about 300. They work good. Now you can move around and change how the target looks. You can put a brick or something un...
- August 30th, 2018, 9:30 am
- Forum: Big Bore
- Topic: Vinci chokes
- Replies: 2
- Views: 2505
Re: Vinci chokes
665 to 670 with the 2 oz load. If you want a good hunting pattern open on up 675 to 680
- August 16th, 2018, 3:27 pm
- Forum: Small Bore
- Topic: 20 ga dove gun
- Replies: 21
- Views: 11409
Re: 20 ga dove gun
Amanda out shoots him anyways.
- August 9th, 2018, 2:15 pm
- Forum: Gun Talk
- Topic: Just another protector option.
- Replies: 6
- Views: 3535
- August 9th, 2018, 8:41 am
- Forum: Gun Talk
- Topic: Just another protector option.
- Replies: 6
- Views: 3535
Re: Just another protector option.
I know we can keep it at 100. We get set up we going to cut 36 at a time so we may can cut some off of that. We also was looking and will be able to make the top to fit on our old base so the guys that have them will not need to upgrade unless they want to.
- August 8th, 2018, 9:10 am
- Forum: Gun Talk
- Topic: Just another protector option.
- Replies: 6
- Views: 3535
Just another protector option.
Ok guy we been playing around some. Few folks ask us about protectors and this is what we did. It is just another option that you have now. Our all in one base. We should have around a 100 in next few weeks.
- August 4th, 2018, 4:08 pm
- Forum: Gobbler Talk
- Topic: This is a precautionary tale for those of you who ride.
- Replies: 22
- Views: 7620
Re: This is a precautionary tale for those of you who ride.
That is the reason I sold mine. Getting to old to fix easy. lol
- June 28th, 2018, 8:50 am
- Forum: Small Bore
- Topic: Stevens 301 single shot 410 ?
- Replies: 9
- Views: 5633
Re: Stevens 301 single shot 410 ?
They seem to be ok but the chamber end is so small it is VERY hard to put a mount on. I like the Yildiz or Midland
- June 18th, 2018, 9:13 am
- Forum: Small Bore
- Topic: 410 Yildiz
- Replies: 14
- Views: 6784
Re: 410 Yildiz
Glad it worked out. Looks like she going to smoke a few this year. Thanks for your Business
- June 2nd, 2018, 10:02 am
- Forum: Gun Talk
- Topic: Benelli M2 Drilled & Tapped?
- Replies: 12
- Views: 8597
Re: Benelli M2 Drilled & Tapped?
drill it at the back. put 6-48 screw that way if you ever have a problem you can go to 8-40.