Search found 236 matches

by SumToy
August 5th, 2019, 11:35 am
Forum: Gobbler Talk
Topic: Domestic terrorist shootings
Replies: 20
Views: 770

Re: Domestic terrorist shootings

one more thing how did he walk across the parking lot with ear protection and a AK47 with not one seeing him. he did not try to hid the stuff looks like
by SumToy
June 4th, 2019, 8:51 am
Forum: Small Bore
Topic: 3020 BARREL
Replies: 6
Views: 634

Re: 3020 BARREL

IT WILL NEED TO BE TRU CHOKE. MOST ALL THE GUNS NOW DAYS HAVE GONE SMALLER ON OUT SIDE TO CUT WEIGHT ON THEM.
by SumToy
April 12th, 2019, 8:32 am
Forum: Small Bore
Topic: Stoeger M3020
Replies: 31
Views: 2432

Re: Stoeger M3020

this will fix you up
by SumToy
April 12th, 2019, 8:31 am
Forum: Small Bore
Topic: Base for Stoeger M3020
Replies: 2
Views: 261

Re: Base for Stoeger M3020

the one you need
by SumToy
February 22nd, 2019, 9:09 am
Forum: Small Bore
Topic: Mossberg 500 .410 patterns
Replies: 9
Views: 1118

Re: Mossberg 500 .410 patterns

I have seen them do good but with hand loads.
by SumToy
January 31st, 2019, 9:10 am
Forum: General Gun Talk
Topic: Thin wall Tru-Choke and TSS?
Replies: 7
Views: 983

Re: Thin wall Tru-Choke and TSS?

Shoot a few through it, and then see how it screws out. If it got tight, then, no go. I have a 20 with Slim Lines in it. Seems to be fine, and they are the thinnest. What this smart may said. I have found on the thin chokes that if it is going to swell it will do it with lead, htl or tss. It more t...
by SumToy
January 27th, 2019, 12:23 pm
Forum: Big Bore
Topic: Berreta Extrema 2 question
Replies: 4
Views: 695

Re: Berreta Extrema 2 question

660 with 6s 665 with the 4s 5s. 665 to 670 with TSS that is in our choke
by SumToy
December 26th, 2018, 12:04 pm
Forum: Gobbler Talk
Topic: URGENT,PRAYERS FOR ICEDED
Replies: 57
Views: 3743

Re: URGENT,PRAYERS FOR ICEDED

Prayers for you and the family
by SumToy
December 13th, 2018, 7:51 am
Forum: General Gun Talk
Topic: SUMTOY question
Replies: 1
Views: 595

Re: SUMTOY question

You want the 562 5. We have few different layouts for other shells or to change up patterns to get what some folks are looking for.
by SumToy
December 10th, 2018, 10:02 am
Forum: General Gun Talk
Topic: Guard for FF3
Replies: 9
Views: 1096

Re: Guard for FF3

SumToy's guards are awesome. No regrets purchases. BTW... whatever happened to Jim Ward and all those Fast Fire guards he was pimping? (If that's on "Sharron's site", I apologize in advance.) He is building them. You can get them from this sight I think. I know few folks been running his protector.
by SumToy
December 6th, 2018, 8:00 am
Forum: General Gun Talk
Topic: Guard for FF3
Replies: 9
Views: 1096

Re: Guard for FF3

We make one and hoobilly has one also.

Ours is one unit. The one hoobilly has will add to the base if you already have base on gun.
by SumToy
December 5th, 2018, 9:26 am
Forum: Small Bore
Topic: New Stevens 301 Turkey .410
Replies: 35
Views: 9825

Re: New Stevens 301 Turkey .410

would like to see a little shorter barrel on it.
by SumToy
November 12th, 2018, 8:33 am
Forum: General Gun Talk
Topic: Mossberg 500A 12 Gauge Turkey Chokes
Replies: 4
Views: 708

Re: Mossberg 500A 12 Gauge Turkey Chokes

660 to 665 with the Winchester. 665 to 670 with the TSS. Now the Federal TSS will take little different on last year shells the test are not out on the New one that is coming.
by SumToy
November 6th, 2018, 8:40 am
Forum: Small Bore
Topic: Who Shoots TSS in a BPS 20 Gauge
Replies: 12
Views: 1780

Re: Who Shoots TSS in a BPS 20 Gauge

We run 562 in them. I see some with the IC 555 also. I think the 562 is the best :toothy7: good luck
by SumToy
October 30th, 2018, 9:59 am
Forum: General Gun Talk
Topic: Red dot removal
Replies: 13
Views: 1559

Re: Red dot removal

Is it a O/U you should be able to take it on and off. Now the Single shot it so thin at back I would leave the base on but can take sight of the base.
by SumToy
October 2nd, 2018, 7:52 am
Forum: Gobbler Talk
Topic: Backyard Clay Throwers.
Replies: 13
Views: 1664

Re: Backyard Clay Throwers.

all in what you want. I had a 5 stand set up with the champion. They have a remote that works about a 100 yards that will run 2 throwers. Now Walmart has the lower end champion for about 300. They work good. Now you can move around and change how the target looks. You can put a brick or something un...
by SumToy
August 30th, 2018, 9:30 am
Forum: Big Bore
Topic: Vinci chokes
Replies: 2
Views: 686

Re: Vinci chokes

665 to 670 with the 2 oz load. If you want a good hunting pattern open on up 675 to 680
by SumToy
August 16th, 2018, 3:27 pm
Forum: Small Bore
Topic: 20 ga dove gun
Replies: 21
Views: 2315

Re: 20 ga dove gun

Amanda out shoots him anyways. :LMAO:
by SumToy
August 9th, 2018, 2:15 pm
Forum: General Gun Talk
Topic: Just another protector option.
Replies: 6
Views: 1262

Re: Just another protector option.

howl wrote:
August 9th, 2018, 10:31 am
How about fitting the JPoint/DeltaPoint footprint?
I get some time to play I will try to see what I can come up with.
by SumToy
August 9th, 2018, 8:41 am
Forum: General Gun Talk
Topic: Just another protector option.
Replies: 6
Views: 1262

Re: Just another protector option.

I know we can keep it at 100. We get set up we going to cut 36 at a time so we may can cut some off of that. We also was looking and will be able to make the top to fit on our old base so the guys that have them will not need to upgrade unless they want to.
by SumToy
August 8th, 2018, 9:10 am
Forum: General Gun Talk
Topic: Just another protector option.
Replies: 6
Views: 1262

Just another protector option.

Ok guy we been playing around some. Few folks ask us about protectors and this is what we did. It is just another option that you have now. Our all in one base. We should have around a 100 in next few weeks.
by SumToy
August 4th, 2018, 4:08 pm
Forum: Gobbler Talk
Topic: This is a precautionary tale for those of you who ride.
Replies: 22
Views: 2920

Re: This is a precautionary tale for those of you who ride.

That is the reason I sold mine. Getting to old to fix easy. lol
by SumToy
June 28th, 2018, 8:50 am
Forum: Small Bore
Topic: Stevens 301 single shot 410 ?
Replies: 7
Views: 1635

Re: Stevens 301 single shot 410 ?

They seem to be ok but the chamber end is so small it is VERY hard to put a mount on. I like the Yildiz or Midland
by SumToy
June 18th, 2018, 9:13 am
Forum: Small Bore
Topic: 410 Yildiz
Replies: 14
Views: 2175

Re: 410 Yildiz

Glad it worked out. Looks like she going to smoke a few this year. Thanks for your Business
by SumToy
June 2nd, 2018, 10:02 am
Forum: General Gun Talk
Topic: Benelli M2 Drilled & Tapped?
Replies: 12
Views: 1770

Re: Benelli M2 Drilled & Tapped?

drill it at the back. put 6-48 screw that way if you ever have a problem you can go to 8-40.

Go to advanced search